Wall Oven Igniters

Fix Number

FIX470129

Manufacturer Part Number

5303935066

If your gas range will not heat up, is not coming up to temperature, the igniter is not glowing, or it glows but will not light, you may need to replace the igniter. This part is a genuine OEM flat style oven igniter and includes two ceramic wire nuts to assist with installation. The igniter is used to light the oven burner in your range by igniting the gas. Before beginning this repair, please be sure to disconnect the power and gas supply to your range. When handling this part, be careful not to touch the black element on the igniter, as this section is very fragile. The igniter measures approximately 3.72 inches in length, with 18 inches of wire lead, and has an amperage range of 3.2 to 3.6.

★★★★★

★★★★★

5 Reviews

Fix Number

FIX2085070

Manufacturer Part Number

74007498

If your gas range is not lighting or coming up to temperature, there may be an issue with the igniter. The igniter is used to create a spark that lights the gas, and if it is glowing but will not light then the igniter will need to be replaced. This part is an authentic OEM replacement oven igniter for your gas range. The part comes with a metallic mounting bracket, and a dual wire lead that is 7-inches in length. Before beginning this repair, please be sure to disconnect both the power and gas supply to your range.

Fix Number

FIX1573892

Manufacturer Part Number

12400035

If your gas oven isn’t lighting properly, this flat-style igniter kit might be the fix. It helps open the gas valve and ignite the burner for baking or broiling. It works with many ovens and replaces both short and long flat igniters—but not round ones. If your igniter glows but doesn’t light the burner, it’s probably too weak. The kit includes everything you need: the igniter, wires, bracket, and instructions. It’s about 3 ¾ inches long and easy to install with basic safety steps—just unplug the oven and turn off the gas. Sold individually.

★★★★★

★★★★★

1 Review

Fix Number

FIX3535362

Manufacturer Part Number

MEE61841401

This gas range oven igniter is compatible with various models of LG gas ranges. It is made up of the igniter element, wire harness, connector and mounting bracket. The igniter is responsible for generating the heat needed to ignite the gas and create a flame for you to cook your food. You can find the igniter located near the oven burner. If your igniter is faulty, you will likely notice that it does not glow, or it glows dimly, the flame is weak, or there is no ignition at all. If the igniter is cracked or visibly damaged in any way it is best to replace it to ensure your safety.

★★★★★

★★★★★

5 Reviews

Fix Number

FIX243425

Manufacturer Part Number

WB2X9154

This is a genuine OEM replacement round style igniter for your gas oven. Also known as a bake and broil igniter, this part is used to ignite the gas in order to light the oven burner and produce heat for cooking. If your oven will no longer start, there is little or no heat, or the igniter glows but will not light, then it likely needs to be replaced. Please note that the igniter is very fragile and should be handled with care, especially avoid touching the gray element portion. This igniter measures approximately 3 1/2 inches in length with an amperage of 2.5 to 3.0, with two high-temperature wire connectors. Be sure to disconnect the power and gas supply to your range before beginning this repair. This is a round style igniter, and will not work for models that require a flat style.

Fix Number

FIX387058

Manufacturer Part Number

786324

This is an authentic OEM replacement part.?This flat style over igniter is commonly used in ranges and wall ovens. This igniter is specifically used to ignite the broil element. The igniter pulls current from the ignition circuit, the more current it pulls the hotter the element gets. When it starts to glow and it reaches a certain temperature the gas valve will open and this igniter will create the spark needed to light the gas. When you are installing this replacement part you will need to reuse the original mounting bracket, and you will need a screwdriver. This ignitor is approximately 7.5 inches in length, it is flat in style, it has a 5-1/4-inch ceramic block, and it features 12-inch wire leads. Be careful not to touch the black element as it is very fragile. Before starting this repair make sure you have shut off the gas supply and unplugged the appliance.

Fix Number

FIX12584919

Manufacturer Part Number

5303935059

This is an OEM broil igniter, which works with ranges.

Fix Number

FIX470130

Manufacturer Part Number

5303935067

This flat style gas oven igniter is 5.53 inches long and comes with a bracket and wire nuts. Its amperage range is between 3.2 and 3.6 amps. May be different in appearance but will function as the orginal part.

★★★★★

★★★★★

1 Review

Fix Number

FIX389156

Manufacturer Part Number

814269

This igniter is lighted by the spark switch to produce a flame to ignite the oven.

Fix Number

FIX470131

Manufacturer Part Number

5303935068

This flat style gas oven igniter comes with a bracket and wires. Its amperage range is between 3.2 and 3.6 amps.