General Electric Trash Compactor Parts

General Electric Appliance Parts

Popular General Electric Trash Compactor Parts

Compactor Bags - 10 Pk
$49.39
In Stock
Fix Number
FIX257999
Manufacturer Part Number
WC60X5015
The compactor bag is used in a trash compactor, where trash is compressed. This bag is made of a stronger plastic material so that it is able to contain a large amount of trash. It is also strong enough to compress trash as it gets pushed without easily tearing. The external bag surface grips to prevent the bag from slipping into the compactor and the interior of the bag is slippery, to compress trash easily. Refer to the manual provided by the manufacturer for any installation instructions or guidance.
Fix Number
FIX1964577
Manufacturer Part Number
W10165294RB
Plastic compactor bags. 50% post-consumer recycled plastic 3 millimeters thick to protect from tearing. Slip-N-Grip design prevents the bag from slipping into the compactor. Fits 15" rectangular compactors.

Installation Instructions

James from Warwick, NY
Ran out of compactor bags
I put in a new bag. Honestly guys, filling out this questionnaire took more time than replacing a bag, something we do every week. I know that you mean well, but perhaps you should try to differentiate between disposable items and true repair parts. Read more...
Plastic Compactor Bags - 15 Pack
$42.18
In Stock
Fix Number
FIX312032
Manufacturer Part Number
WX60X1
Fits round or rectangular compactors.
15 Inch Compactor Bags - 15 Pack
$26.73
In Stock
Fix Number
FIX1964579
Manufacturer Part Number
W10165295RP
These bags will fit most 15" rectangular compactors.
18 Inch Compactor Bags - 60 Pack
$63.19
In Stock
Fix Number
FIX1964576
Manufacturer Part Number
W10165293RB
Used for trash compactors.
Foot Pedal Assembly
$51.97
In Stock
Fix Number
FIX12743111
Manufacturer Part Number
WC09X20229
Frame Roller Assembly
$42.18
In Stock
Fix Number
FIX16591420
Manufacturer Part Number
WC01X20226
This frame roller assembly allows a trash compactor drawer to glide smoothly in and out, reducing strain and preventing grinding or squeaking noises during operation. When the rollers wear down, the drawer may feel difficult to move, sit unevenly, or produce unusual sounds. Replacing the assembly restores proper movement and helps the compactor operate quietly and reliably. Installation is straightforward and typically involves removing the old rollers and securing the new assembly in place.
Fixes these symptoms
Drawer Roller Assembly
$16.75
In Stock
Fix Number
FIX16591421
Manufacturer Part Number
WC01X20232
The drawer roller attaches to the bottom of the drawer and allows the drawer to roll in and out.
Fixes these symptoms
Trash Compactor Power Nut Kit
$51.45
In Stock
Fix Number
FIX11747554
Manufacturer Part Number
WP9870163
This is a genuine OEM replacement part. This is a power nut and it is commonly used in the assembly of trash compactors. This power nut is part of the ram assembly that compacts your trash, it attaches to the side of the ram. The power screw is fed through the power nut as it rotates, this pulls the ram down and compacts the trash in the container. This part is made out of plastic which means it will wear down over time and need to be replaced. Before repairing your trash compactor make sure it is unplugged.
Fixes these symptoms
Power Nut Assembly
$24.68
In Stock
Fix Number
FIX16554596
Manufacturer Part Number
WC02X20287
This power nut is for trash compactor and attaches to the side of the ram and is threaded. As the power screw rotates, it feeds through the power nut pulling the ram down to compact the trash.
Fixes these symptoms

Installation Instructions

Michael from Lakeville, MN
One of the 2 Nut Power nylon screws failed
The "smasher" got jammed sideways when this part failed on one side. Could not open the front door. Had to pull the whole unit out, take to garage and repair. Start by taking bottom panel off. This gives you access to the chain drive. Put on some leather gloves and turn chain CCW until "smasher unit comes loose. Pull out of top of unit (other panels need to be removed and front control panel must be removed also). Now replace both nylon "NUT POWER ASM" parts. If you are handy, you can do this repair easily and save yourself $$$ Read more...

General Electric Trash Compactor Appliance Types

Related General Electric Trash Compactor Parts

Popular General Electric Trash Compactor Models