Models > GCG1520F1BB

GCG1520F1BB General Electric Trash Compactor

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for GCG1520F1BB

Viewing 6 of 6
ACCESSORY PARTS Diagram and Parts List for General Electric Trash Compactor
ACCESSORY PARTS
CABINET & CONTROL PARTS Diagram and Parts List for General Electric Trash Compactor
CABINET & CONTROL PARTS
CONTAINER PARTS Diagram and Parts List for General Electric Trash Compactor
CONTAINER PARTS
FRAME PARTS Diagram and Parts List for General Electric Trash Compactor
FRAME PARTS
MOTOR & DRIVE PARTS Diagram and Parts List for General Electric Trash Compactor
MOTOR & DRIVE PARTS
POWERSCREW & RAM PARTS Diagram and Parts List for General Electric Trash Compactor
POWERSCREW & RAM PARTS

Manuals & Guides for GCG1520F1BB

Click to download
Manual
Owner's Manuals
(0.74MB)
Keep searches simple, eg. "belt" or "pump".
Compactor Bags - Package of 12 – Part Number: WC60X5017
$176.28
These bags will fit all fifteen inch rectangular trash compactors.
In Stock
Drive Gear Kit – Part Number: WC36X5071
No Longer Available
Container Handle – Part Number: WC36X10036
Screws are sold separately.
No Longer Available
Rotary Switch Knob – Part Number: WC36X10012
No Longer Available
Foot Pedal - Black – Part Number: WC36X5039
No Longer Available
Rotary Switch Kit – Part Number: WC36X5008
No Longer Available
Power Nut Kit – Part Number: WC36X5083
This kit includes the power nut and 2 clips/washers. Screws/studs are sold separately.
No Longer Available
Bag Carrier – Part Number: WC36X10015
This part holds the trash compactor bag to make taking out the trash without worrying about tearing the bag. * This part also comes with the 2 handles.
No Longer Available
SWITCH TOP LIMIT & DIR – Part Number: WC36X5054
No Longer Available
SCREW 8-32 X 3/8 – Part Number: WC36X5038
No Longer Available
NUT ROTARY SWITCH – Part Number: WC36X5011
No Longer Available
SCREW 8-18X1/2 – Part Number: WC36X10035
No Longer Available
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for GCG1520F1BB

Viewing 1 of 1
Compactor ram gets stuck
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
  • Customer:
    william from andover, MA
  • Parts Used:
    WC36X5071
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers
trash compactor ram not moving - broken plastic drive gear
1) pulled the compactor from under the counter and unplugged it. 2) tipped it on its side 3) removed 5 screws (3 on the motor side and two on the bottom) an took off the bottom cover plate. 3) using the pliers i pulled of the retainer clip from the large drive gear(it had broken on only the hub remain attached) 4) i then just slid in the new gear, snapped in the retainer clip and buttoned up the cover plate. Note I did not replace the other parts that came in the package because the existing ones seemed ok.
16 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    CONNIE from MARANA, AZ
  • Parts Used:
    WC36X10036
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
handle broke
My husband removed the old handle by unscrewing the 2 screws, and replaced it with the new handle, replacing the 2 screws. EASY
7 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    James from SHREVEPORT, LA
  • Parts Used:
    WC36X10036
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Handle cracked
Remove two screws, remove old handle installed new handle, install two screws.
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More