Official Gibson Refrigerator Ice Makers

Refrigerator Ice Maker Assembly

$82.66

Fix Number: FIX12364147
Manufacturer Part Number: 241798231

This is a genuine OEM ice maker assembly for your refrigerator. The ice maker makes eight cubes at a time, by filling the mold with water from the inlet valve, freezing the water until the cubes are formed, and then ejecting them into the storage bucket. This process will repeat until the ice bucket is full. If your device is not making ice cubes, the ice maker assembly may need to be replaced. Please ensure that you disconnect the power and water supply to your fridge before beginning this repair. This kit includes the fill cup, a four-pin wire harness adapter, and tube.

Fixes these symptoms

Clicking sound
Ice maker dispenses too little ice
Ice maker not making ice
See more...

Watch the install video

Replacement Ice Maker

$92.97

★★★★★

2 Reviews

Fix Number: FIX2121513
Manufacturer Part Number: D7824706Q

If your freezer has stopped making ice cubes, it may be time to replace your ice maker. Normal wear and tear, or accidental damage may be the cause of this. This model includes the control device and ice mold, which are made of plastic and metal, and measure approximately 11 inches long by 5 inches wide. Please note that this kit does not include the cover, ice level arm, or the wire harness. These parts can be ordered separately, or you can use the existing parts from the original ice maker. This Replacement Ice Maker is a genuine OEM part and is also known as an Ice Maker Assembly or a Refrigerator Ice Maker. Installation will require a quarter inch nut driver, and make sure that you disconnect your power and water supply before beginning this repair. Once the new part is in place, your fridge will begin making ice again within a few hours.

Fixes these symptoms

Clicking sound
Doesn’t stop running
Ice maker dispenses too little ice
See more...

Watch the install video

Ice Container and Auger Assembly

$108.07

Fix Number: FIX1991430
Manufacturer Part Number: 241860803

This ice container assembly is a genuine OEM replacement part for your refrigerator. This kit includes the container that holds the ice, along with the auger and blades. Replacing this assembly is an easy repair that does not require any tools. First turn the ice maker off, then remove the old container from the freezer. Line up the connector with the auger yoke, then slide the new container into place. The ice maker can be turned back on, and you will be all set.

Fixes these symptoms

Ice maker dispenses too little ice
Ice maker not making ice
Ice maker won’t dispense ice
See more...

Watch the install video

Replacement Ice Maker

$83.47

Fix Number: FIX735469
Manufacturer Part Number: 5303918277

This part is the replacement heat-release ice maker unit only. This kit comes with four round female connectors at the end of the wire harness. It also comes with the adaptor that converts the harness to three round female and one round male connectors.

Fixes these symptoms

Ice maker not making ice
Ice maker won’t dispense ice
Leaking
See more...

Watch the install video

Ice Dispenser Drum

$51.97

★★★★★

2 Reviews

Fix Number: FIX1526412
Manufacturer Part Number: 241685101

This genuine replacement ice dispenser drum is designed for use with a wide range of refrigerator models. Made from durable plastic, the drum plays a key role in your ice maker by capturing ice and directing it to the crusher for dispensing. It is positioned between the ice dispenser drive plate and the ice crusher mounting plate, ensuring smooth and efficient operation. If the drum becomes damaged or worn, replacing it is a simple process. All you’ll need is a Phillips head screwdriver. Just remove the necessary components to access the drum, unfasten it, and install the new one in its place. This part is sold individually and is compatible with many refrigerator models—check your model’s diagram to confirm fit.

Fixes these symptoms

Ice maker not making ice
Ice maker won’t dispense ice
See more...

Watch the install video

Ice Container/Bucket

$76.05

Fix Number: FIX1526586
Manufacturer Part Number: 241734001

This genuine OEM ice container, also known as an ice bucket, is designed for use in refrigerators to store ice cubes. It should be replaced if it develops significant cracks or breaks that could affect performance. To remove the container, open the freezer door and lift it out, ensuring the ice maker’s shut-off arm is in the off position. Transfer the front panel, access door, shield, crusher assembly, and auger assembly from the old container to the new one—without disassembling the crusher and auger assembly, if possible, to simplify the process. When aligning the control rod, make sure one set of crimps sits in front of the crusher assembly plate and the other behind it. To secure the other end, hook the spring around the tab at the bottom of the container and tuck the bracket behind the tab. Engage the rod’s hook by rotating it into the flapper door. Reinstall the front panel and access door by aligning the holes and fastening them in place. Finally, snap the guard back onto the side rails of the bin, ensuring the ridged edge faces forward. Please note that this replacement part includes only the ice bucket; additional components must be purchased separately.

Fixes these symptoms

Ice maker not making ice
Ice maker won’t dispense ice
Leaking
See more...

Watch the install video

Refrigerator Ice Dispenser Solenoid

$58.09

Fix Number: FIX8691994
Manufacturer Part Number: 241675704

The cube solenoid allows cube or crushed ice to be dispensed on demand. 120V 60Hz

Fixes these symptoms

Ice maker not making ice
Ice maker won’t dispense ice
See more...

Watch the install video

Dispenser Crusher Housing

$61.15

Fix Number: FIX2378689
Manufacturer Part Number: 241885001

This dispenser crusher housing, also known as a refrigerator ice crusher housing, is a genuine replacement part compatible with various refrigerator models. It functions as a protective cover for the ice crushing blades located within the ice container. To complete this repair, you’ll need a Phillips screwdriver, a flat-blade screwdriver, a 1/4-inch nut driver, and a pair of channel lock pliers. Wearing work gloves is recommended for safety. Please note that the replacement part may differ in appearance or color from the original, but it is designed to fit and function exactly the same.

Fixes these symptoms