Frigidaire Refrigerator Drawers and Glides

Frigidaire Appliance Parts

Popular Frigidaire Refrigerator Drawers and Glides

★★★★★
★★★★★
1 Review
Fix Number
FIX430917
Manufacturer Part Number
240530701
The drawer track support provides support for the right side of the sliding drawer to help it move open and closed easily. This part is sold individually, so if you also require the left side rail it will need to be ordered separately. It measures roughly 16 inches long by 1 inch high. If it is damaged it might make it difficult to open and close the fresh food drawer. Check the support rails in case something is blocking it. It is important to replace a damaged rail to prevent it from damaging the drawer itself. The only tool required for this repair is a Philips screwdriver. Remove the entire upper shelf from the inside of the fridge. Place the assembly on a flat work surface. Remove the screws on the back holding the back rail in place. Next, disengage the tabs holding the old right side rail in place. When installing the new one, line up the slotted opening on the rail to the tabs on the drawer and push it in until it snaps into place. Reinstall the back rail with screws. Check the operation of the drawer and place it back into the refrigerator.
Fixes these symptoms
★★★★★
★★★★★
1 Review
Fix Number
FIX429854
Manufacturer Part Number
240337103
This authentic replacement crisper pan, also known as a vegetable drawer, inserts into the refrigerator crisper area. It is used to hold produce and maintain an ideal temperature to help preserve them as long as possible. The pan is clear plastic and measures roughly 11 inches deep, 22 inches long, and is sold individually.
Fixes these symptoms
Fix Number
FIX2358880
Manufacturer Part Number
241993101
If opening and closing your refrigerator is difficult, it could be due to a damaged or warped crisper cover front support. This part keeps the crisper shelf in place and mounts to the inside cabinet wall. Sold individually, this part is white in color, measures approximately 1 inch in diameter, and can be used for the front and rear support. The installation of this part is considered easy and should only take a few minutes. You will need a small flat blade screwdriver, putty knife, and soft hammer. Take the crisper and shelf out of the refrigerator first. To remove the old part, start by pushing the locking pin into the interior of the cabinet using the screwdriver, pull the support out with the putty knife. If taking out the pin is difficult, use a flat blade screwdriver to push it down and out of sight, this will not harm your refrigerator. Remove the pin and attach the new support, using a soft hammer to lock the new pin in place.
Fixes these symptoms
Fix Number
FIX430916
Manufacturer Part Number
240530601
If you notice that opening and closing the meat pan drawer in your refrigerator has become difficult, there may be an issue with the support rails. Regular wear and tear, or excess weight on the shelf can cause damage to the rail. This genuine OEM part is specifically for the left side of the drawer support. If you need to replace the right-side rail, that part can be purchased separately. Replacing this part is simple, and just requires the use of a screwdriver. Remove all items from the shelf and drawer in your fridge, remove the entire shelf assembly and place on a solid work surface, then use the screwdriver to remove the old rail. Line up the new rail, and screw back onto the shelf frame. Test that the drawer slides in and out easily, place everything back into the fridge, and you are done!
Fixes these symptoms
Fix Number
FIX429963
Manufacturer Part Number
240350608
This glass shelf sits above the crisper drawers in your refrigerator. This part is just the glass, there are no brackets or additional mounting hardware (these can be purchased separately if needed). Regular wear and tear or excess weight can cause damage to the shelf, and it should be replaced if damaged. No tools are required to do this, simply remove the old part and carefully place the new shelf glass down ensuring it is lined up properly with the shelf lip. This is a genuine OEM part that measures 23.82 inches by 15.50 inches.
Refrigerator Crisper Drawer Cover
$102.57
In Stock
Fix Number
FIX2363600
Manufacturer Part Number
240364787
This is a genuine OEM replacement crisper drawer cover for your refrigerator. It measures approximately 27 inches by 20 inches and does not include the glass insert for the self. You can reuse the glass from your current drawer cover or purchase it separately if required. This piece sits above the two side-by-side crisper drawers and is made of white plastic.
Fixes these symptoms
Refrigerator Crisper Drawer
$137.59
In Stock
Fix Number
FIX2361214
Manufacturer Part Number
240351061
The crisper drawer, also known as a crisper pan, is a clear plastic drawer found in your refrigerator. They typically hold fruits or vegetables, and the drawer has a slide control that will allow you to adjust the humidity level for the drawer. Regular wear and tear or excess weight in the pan can cause them to become cracked or damaged. This is an authentic OEM part to replace your broken crisper drawer. No tools are required to remove or replace the drawer.
Fixes these symptoms
★★★★★
★★★★★
2 Reviews
Fix Number
FIX648823
Manufacturer Part Number
240350702
The upper crisper drawer cover is the frame that supports the crisper drawer and holds the glass shelf. Excess weight and regular wear can cause damage to the frame, and if broken it should be replaced. The drawer glides for the crisper are molded on to the frame, but the crisper drawer and glass are not included with this part. If you require replacement glass or crisper drawers, they can be purchased separately. Replacing this genuine OEM part is simple; remove the old frame from your refrigerator and lift the glass out. Snap the new frame cover back into place in the fridge, then line up and insert the glass shelf.
Fixes these symptoms
★★★★★
★★★★★
1 Review
Fix Number
FIX430126
Manufacturer Part Number
240356501
If the crisper drawer in your fridge is not sliding in and out easily, it is possible that the rails have become damaged and will need to be replaced. This genuine OEM replacement part is for the rail on the right-hand side as you are looking into the fridge. If you also need to replace the left-hand rail, that part can be purchased separately. Regular wear and excess weight can cause the plastic rails to crack or damage over time. A Philips screwdriver is required to replace this part. You will need to remove any items on the shelf and the crisper drawer, then remove the shelf assembly and place it on a suitable work surface. Next, you remove the screw holding the rail onto the shelf and unlock the tabs. The new slide rail can be attached by locking the tabs into place and reattaching the screw. The shelf can now be placed back into the fridge.
Fixes these symptoms
Refrigerator Crisper Pan Cover
$128.85
In Stock
Fix Number
FIX2361226
Manufacturer Part Number
240364790

Related Parts