Official Kelvinator Range Switches

Infinite Burner Switch - Large Element

$48.21

Fix Number: FIX1145040
Manufacturer Part Number: 316436001

The infinite burner switch is used to control the temperature of the burner element on your stove top. This model is for the larger, eight-inch element. If your burner is not heating up or has uneven temperatures, you should first check with a multimeter to see if the issue is with the element or with the infinite burner switch. If you need to replace the switch, first disconnect the power supply to your range. To change this part, you will need access to the back panel, so you will need to pull the appliance out from the wall. To complete the repair, you will need a pair of needle nose pliers, a number one square head screwdriver, and a Philips screwdriver. The specifications for this genuine OEM part are that the switch is 240-volt, 2100-2600 watt, and 8.8-10.8 amp.

Fixes these symptoms

Element will not heat
Little to no heat when broiling
Oven is too hot
See more...

Watch the install video

Infinite Burner Switch - Small Element - 240V

$61.55

Fix Number: FIX1145039
Manufacturer Part Number: 316436000

This surface burner switch controls the temperature of the stove top 6-inch surface burner. This switch is 240-volt, 1250-1500 watt, and 5.2-6.25 amp. If your element will not heat and is not defective, then you may need to replace the switch. This burner switch is a genuine OEM part. It is recommended to disconnect the power to your range before you start your repair.

Fixes these symptoms

Element will not heat
Oven is too hot
Will Not Start
See more...

Watch the install video

Dual surface element switch

$127.76

Fix Number: FIX3504401
Manufacturer Part Number: 316238201

This switch controls the stove top surface burner. This surface element control switch is for ranges. Surface element control switch turns the surface element on and off and controls how much heat the element produces. Unplug the range or shut off the house circuit breaker for the range before installing this part.

Fixes these symptoms