Microwave Lights and Bulbs

Light Bulb - 40W

★★★★★

★★★★★

3 Reviews

To access the exterior lightbulb, the bottom panel of the microwave will need to be removed. It is secured in place with screws, so will require a Philips screwdriver to remove it. Screw the new light bulb directly into the light socket. If this is the first time you have replaced this light bulb, the old light bulb might be held in place with silicone. This silicone will need to be cut off using either a utility knife or dental floss before removing the light bulb. Once this silicone and old bulb has been removed, the replacement bulb can be screwed in its place.

Light Bulb - 40W

★★★★★

★★★★★

2 Reviews

This is a genuine OEM 40-Watt replacement light bulb that is compatible with various types of appliances. It has a frosted glass bulb with a standard metal socket base, making it easy to screw and unscrew by hand to replace. It is designed to tolerate extreme temperatures, which is why it is commonly used to light the inside of refrigerators and ovens. Depending on the appliance and location of the bulb, disconnecting the power is recommended. This bulb is sold individually.

Microwave Surface Light Bulb

★★★★★

★★★★★

1 Review

This is the replacement lightbulb for your over-the-range microwave. It is found on the underside of your microwave and is used to illuminate your stovetop while you are cooking. This is a genuine OEM bulb that is sold individually. You will need a screwdriver to remove the lens covering the bulb.

Light Socket The light socket in your microwave houses the light bulb and connects it to the power source. The light bulb will screw into it, so the light bulb will be held in place. Be very careful when installing this part, and be sure to consult your manual before you begin this repair.

Halogen Light Bulb - 120V 20W This halogen light bulb is a replacement part for the bulb behind the top grill in your microwave. It is sold individually.

Light Bulb - 40W This is a genuine OEM 40-watt light bulb for your microwave. The bulb is used inside the microwave and lights up when the door is open or when operating. The bulb can also be found underneath the microwave and is used to illuminate the cooktop below. If any of these bulbs have burned out, they should be replaced. Please be sure to disconnect the power supply to your microwave before replacing the bulbs and be mindful of the glass. If the bulb has shattered, protective gloves should be worn.

Microwave Surface Light Bulb This light bulb is for microwaves. Light bulb illuminates the surface below the microwave or the interior of the microwave. Because high-voltage capacitors in a microwave can retain a lethal electrical charge even when the microwave is unplugged, a service technician should install this part unless the owner's manual includes instructions for installing the light bulbs.

Light Bulb - 120V 25W This 25-watt light bulb is a genuine OEM replacement part for a variety of appliances. The 120-volt incandescent bulb has a screw-in base and is used to light up the appliance when the door is opened. If the bulb has burnt out or is broken, it should be replaced. The light bulb is sold individually, but we recommend keeping spares on hand.

Light Bulb - 40W 130V This 40-Watt 130-Volt lightbulb is a genuine OEM replacement for your microwave. The bulb is used either inside the microwave and turns on when the door is open, or the appliance is running. Or it can be found in the bottom of the microwave and is used to illuminate the cooktop of your range. If one of the bulbs has burnt out or broken, it will need to be replaced. Please be sure to disconnect the power supply to your microwave before replacing the lightbulb, and if the glass has shattered safety gloves should be worn.

Light Bulb - 120V 30W