Tappan Microwave Oven Combo Parts

★★★★★

★★★★★

10 Reviews

Fix Number

FIX438018

Manufacturer Part Number

316075103

This genuine OEM bake element is located on the bottom of the oven cavity to supply heat for baking. The approximate size is 19-1/2 inches wide by 18-1/2 inches long and has 3-1/2 inch inserts. The element terminals are male quarter inch spade connectors and have push-on wire terminals. If your oven is not heating evenly, the element will not heat, or there is little to no heat when baking, you may need to replace the element. Please remember to disconnect the power to your oven before you start your repair. Next, remove the 2 screws securing the old element, pull it out, and discard. Connect the new element prongs where the old element fit and screw it back in place. This is a very simple repair that anyone can do.

★★★★★

★★★★★

1 Review

Fix Number

FIX437595

Manufacturer Part Number

316048413

This OEM drip bowl fits under 8-inch burner elements and has a diameter of approximately 10-inches. Drip bowls catch any spills, and are a quick, easy, and cheap way to improve your cooktop aesthetic. While the replacement may be visually different from the original, it will fit your appliance. If your drip bowl has become discolored, corroded, or otherwise damaged, it needs to be replaced. This drip bowl is sold individually, so if you would like to replace all 4 drip bowls on your appliance you will need to account for this. No tools are required for installation, simply line up the hole on the bowl with the terminal block and drop it into place.

★★★★★

★★★★★

2 Reviews

Fix Number

FIX437596

Manufacturer Part Number

316048414

This drip bowl is an OEM approved replacement part designed for use with various electric ranges and cooktops. This part is located underneath the burner to contain any spills while cooking. It fits under 6-inch burner elements and has a diameter of approximately 8-inches. While the replacement may be visually different from the original, if you have used your correct model number to search, this will fit your appliance. Common reasons to replace this often neglected part is if it has become discolored, corroded, or otherwise damaged. Each drip bowl is sold individually. This is a good time to inspect all drip bowls on the appliance, if you would like to give your appliance a fresh look, keeping in mind that they may be different sizes and are sold separately. No tools are required for installation, simply line up the hole on the bowl with the terminal block and drop it into place.

Fix Number

FIX470125

Manufacturer Part Number

5303935058

This kit comes with the necessary components to replace your burner terminal block. It includes interchangeable mounting brackets, a terminal box, ceramic wire nuts, heat shrink protective tubing, and wires. The purpose of this part is to connect the wire harness to the surface element, which allows for the burners to heat up. Some common issues that result from a damaged terminal block is that your element will not heat properly or not heat up at all, may cause burning smell, or make a buzzing noise. If you remove the element and the tips are black, that is a good sign there is a problem with the terminal block and it should be replaced. It may also be necessary to replace the burner elements as well, if the tips are badly damaged. This repair will require a pair of wire strippers, a #1 square head screwdriver, and a heat gun or hair dryer. If you are not comfortable with cutting, stripping, and reconnecting of wires you should contact a qualified professional to complete this repair. Please be sure to disconnect the power supply to your appliance before starting this repair. As this is a genuine OEM parts kit, it will be compatible with your appliance model.

Fix Number

FIX12751166

Manufacturer Part Number

316538904

Clear, 120 Volt, 40 Watt.

★★★★★

★★★★★

1 Review

Fix Number

FIX434227

Manufacturer Part Number

3051163

If you are having difficulty opening or closing the drawer at the bottom of your range, the drawer glides may be damaged. These genuine OEM rear drawer glides help to support the side of the drawer and prevent metal-to-metal contact when the drawer is pulled in and out. Replacing the part is an easy repair, and just requires a flat blade screwdriver. Remove the drawer from the bottom of your range and place it on a suitable work surface. Remove the broken drawer glide by disengaging the locking tab with the screwdriver. Snap the new drawer glide into place and put the drawer back in the bottom of your range, ensuring that the tracks are lined up. The drawer should now slide in easily. Please note that these parts are sold individually, but your drawer requires four glides ? one for each corner. If you need to replace more than one drawer glide, make sure you add the correct quantity to your cart.

★★★★★

★★★★★

2 Reviews

Fix Number

FIX434226

Manufacturer Part Number

3051162

If the storage drawer at the bottom of your range has become difficult to pull in or out, there may be an issue with one of your drawer glides. The drawer glides are used to help the drawer slide in and out smoothly and prevents metal-on-metal contact. The glides are sold individually, and there are four in total used in the drawer. This genuine OEM part is easy to replace, first remove the drawer from the bottom of your oven and place it on a suitable work surface. Then use a flat head screwdriver to pop the old glide off and snap the new one into place. Please note that rear drawer glides are sold separately.

Fix Number

FIX470129

Manufacturer Part Number

5303935066

If your gas range will not heat up, is not coming up to temperature, the igniter is not glowing, or it glows but will not light, you may need to replace the igniter. This part is a genuine OEM flat style oven igniter and includes two ceramic wire nuts to assist with installation. The igniter is used to light the oven burner in your range by igniting the gas. Before beginning this repair, please be sure to disconnect the power and gas supply to your range. When handling this part, be careful not to touch the black element on the igniter, as this section is very fragile. The igniter measures approximately 3.72 inches in length, with 18 inches of wire lead, and has an amperage range of 3.2 to 3.6.

Fix Number

FIX820208

Manufacturer Part Number

316217002

This is a temperature sensor for a range. The sensor is what detects the temperature inside the oven and is often replaced when the oven is having heating issues. Please note that the wire connector may be different from the original; if this applies to your part, cut the quick connect and wire together with porcelain wire nuts. For this DIY repair, you will need a Number 2 Phillips or Number 2 square-head screwdriver and possibly wire strippers. Make sure to disconnect the power before installing this part. You will need to pull the range from the cabinet to gain access to this part from the back of the unit.

★★★★★

★★★★★

2 Reviews

Fix Number

FIX2368974

Manufacturer Part Number

318372211

This element has looped terminal ends and comes with a black medallion center. This element is a genuine OEM replacement part, has looped terminal ends, comes with a black medallion center, and fits most electric ranges. All burners are made of a heating wire that produces heat from electricity. Remove the non-functional burner element from the terminal block (or receptacle). Use a multi-meter to check for continuity. Check the end of the terminals for corrosion or heat damage. If there is corrosion or heat damage, replace the whole terminal block or receptacle at the same time you replace the damaged coil. Before you start this repair, make sure that the element is turned off and cool to the touch.