General Electric Microwave Oven Combo Elements and Burners

Bake Element - 220V 2300W

★★★★★

★★★★★

2 Reviews

The bake element provides heat to your range in order to cook your food. If your oven is not heating or has inconsistent temperatures, it may be time to replace the element. This is a genuine OEM replacement part for your range that measures approximately 15-1/4 inches long and 18-1/4 inches wide. It is a closed hinged style of element and is 220 volts and 2300 watts. Be sure to disconnect the power supply to your range before beginning this repair.

Bake Element - 240V

★★★★★

★★★★★

1 Review

This part is located in the bottom of your appliance and is what supplies the heat for cooking and baking. If your oven or range has no heat coming from the element or is not heating evenly, you may need to replace the element. This repair is considered to be of medium difficulty and requires the use of a screwdriver. Other items that may help with your repair are a flashlight, and wooden clothes pins (to prevent the wires from falling back into the oven). This kit comes with two installation screws and the 240 volt bake element, which is a black metal piece approximately 13 inches wide and 16.5 inches in length. Ensure that you unplug the appliance or shut off the circuit breaker before beginning. Removing the oven racks, and even the oven door can help make accessing the bake element easier.

Bake Element

★★★★★

★★★★★

1 Review

This is a genuine OEM part is a partially open-style bake element for your oven, and comes with 1/4-inch push-on terminals. The bake element is found in the bottom of your oven, and it is responsible for providing the heat to cook your food. If your oven is not heating up, or has inconsistent temperatures, it may be time to replace the element. You can test the element with a multimeter to see if it is faulty. Please be sure to turn off the power to your range before beginning this repair.

Broil Element This is an OEM authorized screw-on broil element for a range. It is inside the oven on the top, where it supplies heating for broiling. A few reasons it might be replaced include: no heating coming from the element and uneven heating. Please note that this broil element does not include the mounting bracket. The depth of the screw-on terminals is 2-3/4 inches, and they are 1-1/4 inches apart.

Broil Element - 240V

★★★★★

★★★★★

1 Review

This oven broil element has push-on terminals.

Bake Element

★★★★★

★★★★★

3 Reviews

This bake element is found on the bottom of the oven.

Single Heating Element Support Clip This metallic clip is used to help support the broil element. Sold individually.

Bake Element - 3400W This bake element is found on the bottom of the oven.

Dual Radiant Element - 9 Inch This is a large dual haliant element with a limiter or sensor for glass cooktops and freestanding ranges. It is a 2500-watt part. The inner diameter measures 9 inches, while the outer diameter measures 10 inches. If there is no heat generated from your element, you may need to replace this part. You may also need to check your socket or infinite switch. It is located under the glass cooktop of your appliance. Be sure to unplug or cut the circuit breaker to your appliance before starting this repair. Before replacing this part, be sure your appliance is getting enough power. If it is receiving less than the required 220 volts of alternating current, the surface element will not work.

Surface Element - 8 Inch - 2350W