Hotpoint Dryer Bearings

★★★★★

★★★★★

1 Review

Fix Number

FIX17137205

Manufacturer Part Number

WE03X37318

This single drum bearing slide attaches to the outer-most side of the bearing. This part is also sometimes referred to as a drum slide, drum glide, or drum pad. It provides support to the front of the drum as it rotates. They are approximately 3-inches long, 1 inch wide and made from a durable white plastic. If your appliance starts making unusual sounds, is not drying clothes properly, or leaves marks on clothes, it may be time to replace this part. The dryer has 2 slides, which we recommend replacing at the same time, as they tend to wear out at the same rate. You will need to order 2 of this part to replace both drum bearing slides, since it is sold individually. Before you begin this repair, be sure to disconnect the power to the dryer.

★★★★★

★★★★★

2 Reviews

Fix Number

FIX17137203

Manufacturer Part Number

WE03X37317

This single drum bearing slide is an OEM approved replacement part for dryers. It can also be known as a bearing drum slide, pad, or glide. The slides attach to the inner most slots on the front bearing. As the dryer rotates, the drum bearing slides help to support the front of the drum. If your appliance becomes noisy, is not drying properly, or leaves marks on clothes, it may be time to replace it. If you are replacing one slide, we recommend replacing the other slide at the same time, as they deteriorate at a similar rate. You will need to order 2 of these parts as there are 2 in each dryer. It is approximately 2.6-inches deep, 0.06-inches in height, and 0.5-inches wide. This part is denoted as being green in the title, however users and technicians have noted it is actually gray in color.

Fix Number

FIX17137207

Manufacturer Part Number

WE03X37319

f your dryer is excessively noisy when operating, is not tumbling, or is leaving marks on your laundry, it may be time to replace the drum glides. The drum glide bearing is a genuine OEM part for your dryer and is used to help the drum rotate smoothly and quietly. If the bearing has worn out, it can make your dryer noisy when operating, with a metal-on-metal sound. Please be sure to disconnect the power supply to the dryer before beginning this repair.

★★★★★

★★★★★

2 Reviews

Fix Number

FIX960316

Manufacturer Part Number

WE3M26

Located on the inside of the dryer front panel, the front drum bearing helps your appliance to operate as quietly as possible. It allows the front of the drum to glide smoothly on the felt seal of the front panel when the drum is rotating. This manufacturer-approved part is made of a durable white plastic and measures approximately 9 inches by 20 inches. If your dryer makes a continuous banging noise while it is powered on, it is likely that the drum bearings need to be replaced. Keep in mind that the drum slides should be replaced at the same and will need to be purchased separately (the front drum bearing holds 4 glides), as this part includes the bearing only.

Fix Number

FIX17626249

Manufacturer Part Number

WE03X37320

If your dryer is making a squealing, metal-on-metal noise you may need to replace your slide bearings. These slide bearings are genuine OEM replacement parts that measure approximately 3 inches in length. They act as a supportive liner for the dryer and prevent the scraping or squealing noise from occurring as the drum rotates. If the slide bearings have eroded or become damaged, they should be replaced.

★★★★★

★★★★★

1 Review

Fix Number

FIX267529

Manufacturer Part Number

WE25M40

This rear drum bearing kit is a genuine OEM replacement for your dryer. The kit includes a shaft, ground strap, bracket, bearing and seven screws for installation. The bearing supports that back of the dryer drum and helps to reduce friction so that the drum can rotate smoothly and quietly. If the bearing has worn out, it can result in your dryer not tumbling, or making excessive noise when it is running.

Fix Number

FIX266777

Manufacturer Part Number

WE1M462

This rear drum bearing sleeve supports the dryer drum and helps it rotate smoothly. It’s a common fix for noisy dryers or drums that wobble or stop turning. Compatible with select GE and Hotpoint models, it restores proper alignment and reduces friction.

Fix Number

FIX11736622

Manufacturer Part Number

WE03X23956

This front drum support kit helps your dryer drum glide smoothly and stay aligned during use. It’s located near the front opening and supports the drum as it spins. Worn slides can cause noise and reduce drying performance, so replacing them restores quiet, efficient operation.

Fix Number

FIX11763059

Manufacturer Part Number

WE03X25314

Fix Number

FIX12722962

Manufacturer Part Number

WE09X27635