Whirlpool Cooktop Parts

Start With Your Model Number

Need help finding your model number?
Find Parts Fast
Guaranteed Fit
Repair Videos
Fix.com search
Whirlpool Appliance Parts
Shop By Appliance Type Shop By Part Type

Popular Whirlpool Cooktop Parts

Watch the install video
Chrome Drip Bowl - 8 inch – Part Number: WPW10196405
Chrome Drip Bowl - 8 inch
$7.66
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX11750107
Manufacturer Part Number
WPW10196405
This chrome drip bowl is an OEM approved replacement part sourced directly from the manufacturer. Drip bowls are a part for your cooktop, positioned underneath the burner to catch spills. This drip bowl fits under 8-inch burner elements and has a diameter of approximately 10-inches. It is common for the manufacturer to switch up designs, so it may not match your current part, however searching using the correct model number will ensure proper fit and function. Drips bowls are prone to wear and tear and can be a fire hazard if not replaced when needed. It is also a quick, easy, and cheap way to give your appliance a fresh new look. Each drip bowl is sold individually, so if you are interested in replacing your other drips bowls, they need to be ordered separately. This is also an opportune time to inspect the terminals for corrosion or damage, and the condition of the burner. No tools are required for installation, simply line up the hole on the bowl with the terminal block and drop it into place. Give your new drip bowl a regular cleaning with warm water and soap to help it last as long as possible.
Fixes these symptoms

Installation Instructions

Henry from St Louis, MO
Replace old drip Bowls
Remove heating elements, remove old drip bowl, install new drip bowls replace heating elements. Read more...
Watch the install video
Drip Bowl - 6 Inch – Part Number: W10196406RW
Drip Bowl - 6 Inch
$10.09
In Stock
★★★★★
★★★★★
2 Reviews
Fix Number
FIX2366565
Manufacturer Part Number
W10196406RW
The drip bowl is used for electric ranges or cooktops with the coiled style burners, to catch any drips, spills, or crumbs that may occur while cooking. If your bowls have become discolored, corroded, difficult to clean, or otherwise damaged it may be time to replace them. This repair is easy and does not require any tools to complete the job. Ensure that all burners are turned off and cool to the touch before starting. First you need to lift up and disconnect the burner from the socket. While you have the burner out, it is a good time to check it for any signs of damage. Look at the terminals for any signs of arcing or burning. If you notice this, you will want to replace both the element and the receptacle it plugs into. Remove the old drip bowl by pulling it out. Then insert the new one by lining up the small hole on the side with the element block. Ensure that it is siting flat and then plug the element back into the socket. Please note that the manufacturer has substituted this part, and it no longer has a solid bottom. It is not recommended to cover the hole with products like aluminum foil, as it can trap heat or melt, becoming a fire hazard. As it is an OEM part, it ensures it will fit your model. The drip bowls are sold individually, chrome in color and about 8 inches in diameter, made to fit under a 6 inch burner element.
Fixes these symptoms

Installation Instructions

chris from ABERDEEN, SD
Burner would not heat up and the cook top on light would not turn off.
First turn off breaker. Pull out stove and unplug. There was about 8 screws on the panel on the back side of the control panel. Remove panel. Remove knob on the bad control and there is 2 screws behind knob. Remove those 2 screws and take the new control and remove 1 wire at a time from old switch to new one then put back together. Read more...
Watch the install video
Drip Bowl - 8 Inch – Part Number: W10196405RW
Drip Bowl - 8 Inch
$10.87
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX2366563
Manufacturer Part Number
W10196405RW
The drip bowl is found underneath the burner element of ranges with a rolled terminal style plug-in surface element. The purpose of the bowl is to catch any drips or spills that may occur while cooking. If the drip bowl has become damaged or tarnished beyond cleaning, it may be time for a replacement. This is a genuine OEM part that is 8-inches in size and is sold individually. When you replace the drip bowl, you will need to remove the element from the terminal block. At this time, you should also inspect the elements for any signs of damage or corrosion and replace them if necessary.
Fixes these symptoms

Installation Instructions

chris from ABERDEEN, SD
Burner would not heat up and the cook top on light would not turn off.
First turn off breaker. Pull out stove and unplug. There was about 8 screws on the panel on the back side of the control panel. Remove panel. Remove knob on the bad control and there is 2 screws behind knob. Remove those 2 screws and take the new control and remove 1 wire at a time from old switch to new one then put back together. Read more...
Surface Burner Plug-In Block Kit – Part Number: 330031
Surface Burner Plug-In Block Kit
$13.41
In Stock
★★★★★
★★★★★
4 Reviews
Fix Number
FIX340571
Manufacturer Part Number
330031
This is a genuine OEM replacement part. This surface burner plug-in block kit is designed for use with surface elements of your ranges and cooktops. This kit helps connect the wire harness to the surface element. If your element is not heating, or if it only heats intermittently you may have an issue with your terminal block. This is a newer-style terminal block kit, it includes the plastic receptacle block, two metal brackets, two pre-crimped hi-temp wire leads with terminals, two ceramic nuts, two screws, and heat shrinking insulators. Before beginning this repair make sure you have unplugged your appliance.
Fixes these symptoms

Installation Instructions

Doris from Skoke, IL
Elements heat sporatically
I followed the steps in the instructions which were very easy, once the electric power was turned off to the range. I replaced 2 burner plug in blocks in less than 30 minutes. I am embarrassed to say that these burners have not been functional for almost 3 years. I thought that I could not work with electric. Just make sure you have the tools on hand and read the instructions first. I am a mid-50's female, if I can do this so can anyone else! Read more...
Knob - Black/Stainless – Part Number: WPW10316664
Knob - Black/Stainless
$18.23
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX11752662
Manufacturer Part Number
WPW10316664
If you need a new knob for your cooktop, this is a genuine OEM replacement part. The knob is sold individually and fits onto a D-shaped shaft. The knob is made of plastic, with a black and stainless-steel color. It is used to control and adjust the burner elements, and if the knob has become damaged it should be replaced.

Installation Instructions

Lester from CLINTON CORS, NY
The knobs just crack after awhile.
It’s just a matter of replacing the old knobs with the new ones. If there is a problem in this situation, it’s making sure you get the right replacement knobs. I took the number from under the old knobs, but when I received the new knobs, they were four a gas range not my electric range. I called fixit and the woman who answered immediately helped me find the correct knobs. They sent the new ones and I received them overnight! Read more...
Watch the install video
Surface Burner Receptacle Kit – Part Number: 12001676
Surface Burner Receptacle Kit
$13.90
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX1570190
Manufacturer Part Number
12001676
This genuine OEM kit includes the parts required to replace a surface burner receptable on your range. The kit comes with a plastic block, a metal bracket, high temperature wire nuts, and wires. The burner elements on the cooktop plug into the receptacle, and if the burner is not heating up properly, the receptacle may need to be replaced. Other signs that the receptacle is faulty is if there is corrosion on the element terminals. Before beginning this repair, please be sure to disconnect the power supply to your range. You will need a pair of wire strippers and a Phillips screwdriver for this installation.
Fixes these symptoms

Installation Instructions

Steven from Westerly, RI
Burner Receptacle replacement
unplugged stove, removed old burner, lift top (mine did not have retaining screws), cut old wires, unscrewed Receptacle, screwed in new Burner Receptacle, used the wire strippers to strip back the old wire, then used the wire tie to connect (very very easy). done! plugged back in the new burner element (old one was burnt up) and plugged the stove back in, complete! works great! My wife loves me again! :) Read more...
Drip Bowl - Chrome - 8 Inch – Part Number: 715878
Drip Bowl - Chrome - 8 Inch
$13.65
In Stock
Fix Number
FIX2079053
Manufacturer Part Number
715878
This chrome-colored drip bowl is a genuine OEM part for your range. This bowl fits underneath the 8-inch burner elements and is sold individually. The drip bowl is used to catch any spills that result from making food on the cooktop. If your drip bowl has become damaged, tarnished, or is dirty beyond cleaning, it will need to be replaced. Before swapping out the drip bowl, please ensure that the burner element is completely cool to the touch.
Fixes these symptoms

Installation Instructions

Curtis from Jackson, MS
I needed new burners and drip bowls and I wanted a flat radiant cartridge
Very easy! I just replaced the drip bowls, took out old burners and put in new ones. I took out my grill, and replaced with the radiant flat cartridge. I just plugged it right in, and I was done! Read more...
Surface Burner - 8 Inch - 2600W – Part Number: WP660533
Surface Burner - 8 Inch - 2600W
$36.90
In Stock
Fix Number
FIX11743367
Manufacturer Part Number
WP660533
NOTE: The manufacturer recommends that you replace the burner receptacle at the same time.
Fixes these symptoms

Installation Instructions

Robert from Boston, MA
Range surface burner not working properly
Pulled out the old burner and slipped in the new one. Also replaced burner drip bowls. Pulled out the burners, took out old bowls, replaced with new bowls, slipped back burners. All fit perfectly. Read more...
Burner Grate Pads - Kit of 5 – Part Number: 814323
Burner Grate Pads - Kit of 5
$8.38
In Stock
★★★★★
★★★★★
1 Review
Fix Number
FIX389174
Manufacturer Part Number
814323
These pads go on the bottom of your gas cooktop grates to prevent them from moving and scratching the top of your appliance.

Installation Instructions

Carol from Charenton, LA
The rubber knobs keep coming off
I dipped them in glue made to with stand heat, Let it dry and put the burner plates back on top of the stove top. Read more...
Drip Bowl - 6 Inch – Part Number: 715877
Drip Bowl - 6 Inch
$8.39
In Stock
Fix Number
FIX1854703
Manufacturer Part Number
715877
This part includes one OEM chrome-colored 6-inch drip bowl for an electric range. This part is responsible for catching spills from cookware placed on the burner, so it is susceptible to tough stains and rust. Replacing the drip bowl is also a simple and cheap way to freshen up your appliance. To access this part, you will need to remove the burner on top. This repair should only take a few minutes at most.
Fixes these symptoms

Installation Instructions

Carole G from Hampton, GA
My husband cooks but does not clean grease right away
I replace my drip pans when I am not able to clean them completely. These fit perfectly every time. Read more...

Whirlpool Cooktop Appliance Types

Related Whirlpool Cooktop Parts

Popular Whirlpool Cooktop Models

View More
+