Frigidaire Cooktop Elements and Burners

Terminal Block Kit This kit comes with the necessary components to replace your burner terminal block. It includes interchangeable mounting brackets, a terminal box, ceramic wire nuts, heat shrink protective tubing, and wires. The purpose of this part is to connect the wire harness to the surface element, which allows for the burners to heat up. Some common issues that result from a damaged terminal block is that your element will not heat properly or not heat up at all, may cause burning smell, or make a buzzing noise. If you remove the element and the tips are black, that is a good sign there is a problem with the terminal block and it should be replaced. It may also be necessary to replace the burner elements as well, if the tips are badly damaged. This repair will require a pair of wire strippers, a #1 square head screwdriver, and a heat gun or hair dryer. If you are not comfortable with cutting, stripping, and reconnecting of wires you should contact a qualified professional to complete this repair. Please be sure to disconnect the power supply to your appliance before starting this repair. As this is a genuine OEM parts kit, it will be compatible with your appliance model.

Surface Element - 8 Inch - 2600W The surface elements provide heat for cooking on the top your range, typically in a smaller and larger size to fit your various pots and pans. If an element is not heating up, it is a sign that it should be replaced. This is an easy repair that does not require any tools. Before beginning this repair, ensure that the elements are turned off and cold to the touch. With the element removed, inspect the terminals for signs of corrosion or arcing. If these are present, you will need to replace the terminal block as well, or you will have the same issues come up again. This OEM replacement part measures 8 inches in diameter with five coils.

Surface Element - 8 Inch - 220V If the burner element on your range is damaged or no longer heating up, the element should be replaced. When you remove the element, check the terminals for any signs of corrosion or arcing. If you find these, you will also need to replace the terminal block (which can be purchased separately). Replacing this part is easy and does not require any tools. Please ensure that the burner is turned off and cool to the touch before beginning the repair. Lift up and pull out the old element, then line up the new one and insert into the terminal block. This is a genuine OEM part that measures 8 inches in diameter, has four turns, 220 volts, and looped terminal ends.

6-Inch Coil Burner Element

★★★★★

★★★★★

(2)

This element has looped terminal ends and comes with a black medallion center. This element is a genuine OEM replacement part, has looped terminal ends, comes with a black medallion center, and fits most electric ranges. All burners are made of a heating wire that produces heat from electricity. Remove the non-functional burner element from the terminal block (or receptacle). Use a multi-meter to check for continuity. Check the end of the terminals for corrosion or heat damage. If there is corrosion or heat damage, replace the whole terminal block or receptacle at the same time you replace the damaged coil. Before you start this repair, make sure that the element is turned off and cool to the touch.

Surface Element - 6 Inch This is a genuine OEM 6-inch burner element for your electric range or cooktop. If the element is no longer heating up, it may be time for a replacement. When you remove the old element, inspect the terminals for signs of arcing or corrosion. If these are present, you may also need to replace the terminal block that the element is plugged into. Before beginning this repair, be sure to disconnect the power supply to your range. No tools are required to replace the element, simply pull out the damaged part and push the new one into place. Please note that this part is sold individually.

Dual Element with Limiter Dual Element with Limiter -9 Inch /6 Inch - 1300W 1200W. With this element, you can adjust the size of the burner you want to use to match your pots/pans.

Radiant Element with Limiter - 1200W

★★★★★

★★★★★

(1)

Radiant Surface Element This part is the heatsource. This surface element is for ranges. Surface element supplies the heat to a cooking area on top of the range. Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.

Surface Burner Igniter Electrode Use this igniter with sealed burners.

Medium Burner Cap - Black - 9.5k