7MWTW1504DQ1 Whirlpool Washer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Patricia from Berkley, MI
- Parts Used:
- 63580
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
No fabric softener dispenser
Take out cap and replace with new cup
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Doris from Faucett, MO
- Parts Used:
- WP63235
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
Would not agitate
Plastic "teeth" at top of agitator were completely worn off, allowing the agitator to spin freely on the shaft. Just remove the bolt that connects the agitator to the drive shaft (located under the top cap of the agitator), remove and replace agitator and you're all set.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- joe from Cato, WI
- Parts Used:
- 63580
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
My washer did not come with the fabric softener dispenser
Easy as ONE TWO not even a THREE. Just pulled off the cap on top the agitator and dropped in the dispenser. Gave it a little push to seat it and done. Sure beats the softener ball.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- roy from mcdonough, GA
- Parts Used:
- 63580
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
no softener dispenser
Installed cup dispenser and started the laundry
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Rennel J from Rosamond, CA
- Parts Used:
- 63580
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Fabric Softener Dispenser won't dispense softerner.
Very easy. Just snapped it on.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Donald from Zephyrhills, FL
- Parts Used:
- 63580
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Softener started dispensing some black gunk . I cleaned the dispenser but could not get all the gunk out. Decided to install a new dispenser.
Pulled off the old dispenser and popped on the new one. As easy as that. No tools needed. By the way. The service at Partselect was unbelievable. Had the part in about four days. Thanks Partselect.
Was this instruction helpful to you?
Thank you for voting!