7MGHW9100MW0 Whirlpool Washer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Leslie from Richmond, VA
- Parts Used:
- WP8181846
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Wrench set
Plastic door handle broke off when caught on the pocket of my jacket
First, I unscrewed the two screws on the broken handle, using an allen wrench. Then, I screwed on the new handle in it's place. The new grey handle is much lighter in color than the original charcoal grey of the washer, but it blends well and works perfectly.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michele from Aston, PA
- Parts Used:
- WP8181846
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
handle broke off door
the old handle was held in place with two screws.
the screws were removed, handle came off right away and then the new handle was place on the door and the screws were replaced.
the screws were removed, handle came off right away and then the new handle was place on the door and the screws were replaced.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Morgan from Marysville, WA
- Parts Used:
- WP8181846
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
broken door handle
Took two screws out, removed broken handle, replaced with new handle and put two screws back in. Ridiculously easy. :)
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Paul from Lexington, KY
- Parts Used:
- WP8181846
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The door handle cracked
First I waited 6 days after i was E-mailed the part was shipped until it was shipped, then waited two more days to get the part!
Then i removed two TORX screws removed old handle then installed the new one in reverse order.
Then i removed two TORX screws removed old handle then installed the new one in reverse order.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- CHERYL from CASCADE, ID
- Parts Used:
- WP8181846
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
door handle cracked from top bolt almost all the way through
I unscrewed thebolts from the old handle using a small flat screwdriver and removed the cracked handle. I then tossed away all the old duct tape holding the old handle together. Replaced new handle using same old bolts.Strongly cautioned children and husband to not wrench the washer handle open and closed. Tah Dah! Done.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- CINDY from PASADENA, TX
- Parts Used:
- WP8181846
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Handle Broke Off
I removed two screws and removed broken piece and replaced the handle with the same two screws. The color and match of the handle was perfect.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gary from Kenosha, WI
- Parts Used:
- WP8181694
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
water backup when not in use, strip threads
Remove top 3 screws.
Remove 1 screw that holds inlet valve.
slide valve to the right.
Mark and remove 4 connector wires.
Reverse order to install.
Remove 1 screw that holds inlet valve.
slide valve to the right.
Mark and remove 4 connector wires.
Reverse order to install.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Katherine from LONG BEACH, CA
- Parts Used:
- WP8181846
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The door handle was cracked and eventually broke off.
Ordered the part. When it came we needed to find the correct screwdriver because the screw did not work with philips head screwdriver. We used slotted even though it wasn't that type of screw. It worked just fine and installed very easily. It worked great.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Garey from LITTLETON, NH
- Parts Used:
- WP8181846
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Broken handle
Unscrew old one,screw on new one
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joseph from MANCHACA, TX
- Parts Used:
- WP8181846
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Broken Door Handle
Two screws. Take off old handle. Put on new handle.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Steven from Fort Salonga,NY 11768, NY
- Parts Used:
- WP8181694
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Pliers
drum continuing to fill with water
Replaced inlet valve. Took top cover off. Accessed inlet valve. Removed hoses. Replaced valve. Works like a charm.Corrected problem
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Paul from Big Torch Key, FL
- Parts Used:
- WP8181794
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver, Screw drivers
water inlet valve leak and hose
disconect wayer inlet hoses.remove screws that hold the top cover. This will expose the water inlet valve. remove the defective valve and any other associated clamps,hose etc. test run for leaks.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- edward from ATLANTA, GA
- Parts Used:
- WP8181850
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Pliers, Screw drivers, Socket set
Tears in the bellow, leaking
Follow the video when you find the part. It's spot on, exactly what you see and can expect.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Barbara from Farmingdale, NY
- Parts Used:
- WP8181850
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
Duet Washer front bellows had a hole
Went to google; found a uTube video, plus instructions. Followed it and did the repair in a little over an hour.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- LEE from RIO RANCHO, NM
- Parts Used:
- WP8182634
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Washer would not start.
easy process: troubleshoot problem on website-- order part--get part--watch "how to replace"video on you tube-- get it done with only a screwdriver--go out for movie and dinner with $$ saved.
Was this instruction helpful to you?
Thank you for voting!