SWS833HS0 Westinghouse Washer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- mark from avon, CT
- Parts Used:
- 134844410
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
dryer wouldn't start
looked at broken starter knob
picked up the replacement knob
put it on the metal stem
and voila!!!!!
picked up the replacement knob
put it on the metal stem
and voila!!!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- ED from Byron, IL
- Parts Used:
- 134844410
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Knob cracked
pushed on new knob... Really fast shipping!!!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Steve from Fort Mohave, AZ
- Parts Used:
- 134190200
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Cold water was filling slower than the hot water.
Pulled out the machine. Disconnected water lines. Removed four screws attaching the top brackets. In rear of top panel. Slid top panel forward and clear of valve. Removed two wire harnesses. Removed two screws holding valve to the back panel. Pulled valve down and out. Removed outlet side line spring clamp with channel lock pliers and pulled hose off old valve. Installed outlet side hose and spring clamp onto new valve. Placed valve up into place and installed two screws. Installed two wiring harnesses. Replaced top lid. Replaced lid bracket screws. Re-attached water hoses and pushed the machine back into place.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Clearwater, FL
- Parts Used:
- 134844410
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Knob on Dryer broke
I ordered the part one day & it arrived the next day(UPS-Ground)I replaced broken knob with new one & everythings just fine. Thank you for your prompt service !!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Patsy from Wytheville, VA
- Parts Used:
- 134844410
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken and worn out knobs
was just a pop off -pop on knob replacement for worn/broken knobs. Easy on ,less than a minute. The BEST part of my repair...finding exactly the parts I needed and fast shipping, also the site for selecting your parts and trouble shooting repairs is extremly customer friendly......highly reoommend your site/services. Thanks
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ted from Plattsburg, MO
- Parts Used:
- 134844410
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Selector knob broke
Took the old one off & put the new one on!!! About a 2 minute job!!!
Part arrived the day after it was ordered. Amazing service.
Part arrived the day after it was ordered. Amazing service.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Susan from Isle of palms, SC
- Parts Used:
- 134844410
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken start knob on dryer
Put the knob on and done!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- CLARK from JUNEAU, AK
- Parts Used:
- 134844410
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
broken selector knob
removed broken knob..pushed new knob on..
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Carol from Millville, NJ
- Parts Used:
- 134844410
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Dryer knob was missing
Just slipped it on the on-off control, gave it a twist and it was done! Fit perfectly. So glad I found your site.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Nora from Mt. Vernon, OH
- Parts Used:
- 134844410
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Starter knob broke off the machine
I pulled off the broken knob's metal shaft that remained attached to the operating spindle and slid the knob onto the machine.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- diane from arlington hts., IL
- Parts Used:
- 134844410
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
selector knob would not turn on tne dryer
i took the old knob off and put the new one on. it took about 10 seconds. it was simple.the service dept. was extremely helpful in getting the right knob. it was delivered the very next day. i would definitly recommend this company to anyone who has a parts problem.....
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Marie from Marlboro, NY
- Parts Used:
- 134844410
- Difficulty Level:
- Difficult
- Total Repair Time:
- Less than 15 mins
Knobs Do Not Fit Securely
Took broken knobs off and replaced with new ones. Only one fit snuggly; the other two are raised and wobbly.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sumedha from Miami Beach, FL
- Parts Used:
- 134844410
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
starter knob was broken
just slid the new knob and that was it.I have say about PartSelect.com , it was very easy to place order and next day i rec'd the part. excellent service.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joseph from Philadelphia, PA
- Parts Used:
- 134844410
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
went to turn the app on and knob broke off and went into the machine
This is a case of not knowing the proper tool to do the job. I went to turn on the machine and the knob broke( common on this machine). The stub of the knob fell into the machine. Thought that the access plate was put on with screws. I saw that the hole was similar to an allen hole. I couldn't get the screws out so called a repairman. He spent 10 minutes, charged me $65 and then told me that most newer appliances need a tool called a robertsons screw driver to get the screws out without stripping them. I felt like a dope, a $4 tool could have saved me $59. A word to the wise, learn what tools do the job and this won't happen to you. JT
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- mark from sun city, AZ
- Parts Used:
- 134844410
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
knob broke
no problem, pushed the new knob on and all worked as it should.
Was this instruction helpful to you?
Thank you for voting!