Models
>
WF45K6500AW
WF45K6500AW Samsung Washer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Models for WF45K6500AW
Click on the best match to narrow your results.
Diagrams for WF45K6500AW
Viewing 14 of 0
Keep searches simple, eg. "belt" or "pump".
In Stock
Order now and your part arrives by Oct 10
This three count package of Affresh Washing Machine Cleaner helps remove odor causing residue from inside the washer, each slow dissolving tablet works throughout the wash cycle and is suitable for al...
Special Order
In Stock
Order now and your part arrives by Oct 10
$52.13
A washer that walks across the floor or becomes unusually noisy may have a weak suspension damper. The rear shock absorbs tub movement during washing and spinning, helping the machine run more smoothl...
On Order
On Order
$57.11
Shipping bolts are installed through the back of the washing machine, and hold the wash tub and basket in place while your washer is being transported. The tub suspension holds the tub correctly in pl...
In Stock
Order now and your part arrives by Oct 10
In Stock
Order now and your part arrives by Oct 10
$162.83
The drain pump removes water from the washer during the drain portion of the cycle.
In Stock
Order now and your part arrives by Oct 10
In Stock
Order now and your part arrives by Oct 10
$48.95
The thermistor monitors and helps regulator the water temperature in the washer.
In Stock
Order now and your part arrives by Oct 10
In Stock
Order now and your part arrives by Oct 10
On Order
Common Problems and Symptoms for WF45K6500AW
Viewing 5 of 5Shaking and Moving
Fixed by these parts
How to fix it
Leaking
Fixed by these parts
How to fix it
Will not drain
Fixed by these parts
How to fix it
Spinning Issues
Fixed by these parts
How to fix it
Water Filling Issues
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Gumecindo from SALINAS, CA
- Parts Used:
- DC97-16140N
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Pliers, Screw drivers
Water leak from torn front diaphragm
Unplug electrical cord. Remove top of washer. Remove soap dispenser tray. Remove control panel, disconnect electrical harness from back of panel.
Remove front door assembly, make sure you first remove the wire clamp from the front of the diaphragm. Remove hoses from diaphragm and then remove the rear wire clamp on the diaphragm. Ins ... Read more tall the new diaphragm by starting at the bottom and make sure the drain holes line up. Assemble everything back in reverse order of how it was disassembled.
Remove front door assembly, make sure you first remove the wire clamp from the front of the diaphragm. Remove hoses from diaphragm and then remove the rear wire clamp on the diaphragm. Ins ... Read more tall the new diaphragm by starting at the bottom and make sure the drain holes line up. Assemble everything back in reverse order of how it was disassembled.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Samuel from NEEDVILLE, TX
- Parts Used:
- DC60-40137A
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Nutdriver, Screw drivers, Socket set, Wrench set
Washer making noise a snow smoking.
Take pics every step, easier re-assembly. Dismantled washer keeping bolt/screw section removed compartmentalized in a tackle box in the order of removal. Replaced drum support, bearings, seal, old blots. Too much to write but I was able to do it all in about 4 hours once all the parts finally came in.
Was this instruction helpful to you?
Thank you for voting!