Models
>
WF45K6500AW
WF45K6500AW (A2-0000) Samsung Washer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for WF45K6500AW
Viewing 7 of 7
Keep searches simple, eg. "belt" or "pump".
In Stock
Order within the next 12 hrs and your part ships today!
In Stock
Order within the next 12 hrs and your part ships today!
In Stock
Order within the next 12 hrs and your part ships today!
In Stock
Order within the next 12 hrs and your part ships today!
In Stock
Order within the next 12 hrs and your part ships today!
In Stock
Order within the next 12 hrs and your part ships today!
$87.25
The thermistor monitors and helps regulator the water temperature in the washer.
In Stock
Order within the next 12 hrs and your part ships today!
In Stock
Order within the next 12 hrs and your part ships today!
In Stock
Order within the next 12 hrs and your part ships today!
$184.75
The drain pump removes water from the washer during the drain portion of the cycle.
In Stock
Order within the next 12 hrs and your part ships today!
In Stock
Order within the next 12 hrs and your part ships today!
In Stock
Order within the next 12 hrs and your part ships today!
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for WF45K6500AW
Viewing 1 of 1
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Samuel from NEEDVILLE, TX
- Parts Used:
- DC60-40137A
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Nutdriver, Screw drivers, Socket set, Wrench set
Washer making noise a snow smoking.
Take pics every step, easier re-assembly. Dismantled washer keeping bolt/screw section removed compartmentalized in a tackle box in the order of removal. Replaced drum support, bearings, seal, old blots. Too much to write but I was able to do it all in about 4 hours once all the parts finally came in.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gumecindo from SALINAS, CA
- Parts Used:
- DC97-16140N
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Pliers, Screw drivers
Water leak from torn front diaphragm
Unplug electrical cord. Remove top of washer. Remove soap dispenser tray. Remove control panel, disconnect electrical harness from back of panel.
Remove front door assembly, make sure you first remove the wire clamp from the front of the diaphragm. Remove hoses from diaphragm and then remove the rear wire clamp on the diaphragm. Ins ... Read more tall the new diaphragm by starting at the bottom and make sure the drain holes line up. Assemble everything back in reverse order of how it was disassembled.
Remove front door assembly, make sure you first remove the wire clamp from the front of the diaphragm. Remove hoses from diaphragm and then remove the rear wire clamp on the diaphragm. Ins ... Read more tall the new diaphragm by starting at the bottom and make sure the drain holes line up. Assemble everything back in reverse order of how it was disassembled.
Read less
Was this instruction helpful to you?
Thank you for voting!