MAH4000BWW Maytag Washer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- richard from HOUSTON, TX
- Parts Used:
- 12002039
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver, Screw drivers, Socket set, Wrench set
Had Hurricane Harvey water high enough to short out control board and soak motor.
Used the conversion kit to replace both parts.Note the supplied instructions say to test the install by running a spin cycle before you put the door and panels back on. However the unit will not initiate a spin cycle without the door lock engaged. Not just the light switch, the actual door lock mechanism. You have to reinstall the door, then test. This error in the instructions cost me about 30 minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Rex from Clearwater, FL
- Parts Used:
- 12002533
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver, Pliers, Screw drivers
Nasty Mold (standard Maytag issue)
Removing the gasket was very easy. A couple hints on installing (1) attach the gasket to the drum first!! this is the trickiest part but once you get it on, attaching the cable and spring was fairly easy (just used two people and a pair of needle nose pliers). Once you get that on, "lube" up the other side with soap to make install easier.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Susan from Springfield, IL
- Parts Used:
- 12002533
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Pliers, Screw drivers
Moldy Door Boot
My husband completed the repair by himself. He said that the "string trick" was helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joseph from Warwick, RI
- Parts Used:
- WP22002798
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Door hinge worn.
Very easy.I used a screw driver to remove and install the new hinges. Three screws on each hinge. Door closes like new again.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Oxnard, CA
- Parts Used:
- 22002290
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
broken plastic part in soap dispenser
Removed the broken plastic bezel and lid assembly. Removed the lid from the bezel by flexing the lid so the hinge pins would clear the mounting holes. Attached the old lid to the new bezel and reinstalled the assembly with the four existing mounting screws.
The repair was easy and for about $15.00 total the soap dispenser is back to new condition.
The repair was easy and for about $15.00 total the soap dispenser is back to new condition.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Tina from Stanton, IA
- Parts Used:
- 22002266
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
purchased a front load washer, missing siphon cap
Ordered siphon cap according to FPS parts list. Wrong cap, but I don't care! Customer support was so helpful and willing to do everything to get me the correct cap, to include refunding my purchase price AND shipping before I even sent it back. They will be my first choice for parts in the future! My husband is a "fix it" guy, so I know that will mean a lot of purchases. I look forward to future business with this company!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ralph from Hampstead, NH
- Parts Used:
- 22002290
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Dispenser Bezel became brittle, so that screws would not hold anymore.
Unscrewed the 4 screws of the old bezel; lifted the bezel out; moved the lid from the old bezel to the new one; set bezel in place and screwed it in with the old screws. Looks and feels like new.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- jim from oklahoma city, OK
- Parts Used:
- WP22001664, WP22001659
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
broken control knob on washing machine
the pictures on your web site allowed me to positively identify the 2 pieces quickly and surely. replacement was a snap and took less than 2 minutes. Thanks!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Neal from Jefferson City, MO
- Parts Used:
- 22002290, WP400021-1
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Dispenser Bezel broked in two places
I visited several web sites looking for repair parts for my Maytag washing machine. Your site was the easiest to navigate and provided great diagrams and pictures to ensure that I purchased the correct part. I liked the ability to track the delivery of my parts via your web site. I received my parts within a couple days.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jose R. from Orlando, FL
- Parts Used:
- WP22001659
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Replace Timer Knob
It was easy as 1,2,3. Took the old knob apart and replaced it with new one. About 20 minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- richard from amston, CT
- Parts Used:
- WP22003262
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
leaking water
removed one panel and front door to access under tub.leak solved!!!! thanks
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sudie from Ocala, FL
- Parts Used:
- 22002266, WP22002265
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
missing parts
Our rental house washer had the parts removed by the last tenant, just replaced them. Thanks!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jim from Oceanside, CA
- Parts Used:
- 12002533
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver
Moldy Bellow
removed door,Opened the front panel, opened the top and proped it out of the way. Pulled the boot from the front cover disconnected the drain, released the boot clamp and pulled the boot off. I cleaned the inside of washer and soap tray. cleaned debris from the drain hose. repaired a broken soap dish connection. changed supply hoses and new valves. Generally checked cleaned and overhauled the washer.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ken from Inverness, FL
- Parts Used:
- 12002533
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver, Screw drivers
Moldy Bellows
Basic disassembly as described earlier.Some tips I found helpfull. Use vice grip pliers on spring.it will keep a grip on the spring hook and you can exert more force to pull the spring.Th bellows was very sticky and hard to slip into place. I put a litle silicone lube ( stuff you use for pool pump gaskets )on the bellows. It made it slip into place easly.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Barryk from Woodland Park, CO
- Parts Used:
- 22002290
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
one of the 4 mounting ears was broken off
I removed 4 screws and removed the bezel, moved the access door to the new bezel and secured the new one with the 4 screws, all done and wife is very pleased.
Was this instruction helpful to you?
Thank you for voting!