MAH21PDDGW Maytag Washer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Bruce from Sudbury, MA
- Parts Used:
- WP33001787, WP33001764
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Wrench set
Door hinge hole covers broken
Unscrewed old screws, removed old plastic pieces, and replaced
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from Scotts Valley, CA
- Parts Used:
- WP22004477
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers, Socket set
Increasing water leak
The machine had the old style boot drain hose with built-in bellows. The constant flexing of this tube caused a small crack in one of the bellows that gradually increased in size over time, causing water to leak into the bottom front part of the machine. Repair accomplished by removing the door (crosspoint screws), the retangular panel above the apron over the door, the apron above the door (5/16 socket), and the front lower panel (crosspoint screws). Pliers used to open the spring hose clamps, old leaky tube removed (re-use the rubber clearance washer that is on the tube). New tube installed easily, then panels reinstalled. 10 minutes total.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Keith from Rocklin, CA
- Parts Used:
- WP22003262
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers
The washer was leaking
I removed the rear access panel, used a nut driver and pliers to remove the old hose. I tried to connect the new hose with the spring clamp on the pump end of the hose. I gave up on that after a few attepmts because the clamp was very hard to manipulate with standard pliers. I used a standard screw type hose clamp (2") that I had instead. The tub end was easier because a standard hose clamp was used there already. The washer no longer leaks, and I saved a lot of money by doing the job myself!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Randy from Queen Creek, AZ
- Parts Used:
- 12001788
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver
Squeeky belt
Followed instructions that came with replacement part, good as new!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Heather from Valley Park, MO
- Parts Used:
- WP22003275
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
Husband forgetting to put parts in from old door
My husband, a mechanical engineer, kept forgetting to take all the brackets out to hold the screws in place and therefore had to take it apart several times to put the brackets in. Difficult time getting some of the parts out of old door to use in new one without breaking them as most were made of plastic. Washing machine works fine now.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Tom from Oak Ridge, TN
- Parts Used:
- 12001788
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Pliers, Wrench set
washer smelled hot on spin cycle
Replaced the belt and motor isolators. Watching your video made it very easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sonia from Granite Falls, WA
- Parts Used:
- WP22003275
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Inside door for washer rubbed hole in
removed screws holding inside panel switched clips and reset and replaced screws in outer door panel. Now works with no leaks
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Leigh from Granbury, TX
- Parts Used:
- WP22003275
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Plastic worn through from years of jeans and tennis shoes
First thing I did was watch the video the parts company provided. It was concise and kept me from calling the appliance repair man to come right out. It looked easy enough for this 60 plus year old woman to accomplish. The steps they showed were right on. The only part I would emphasize is the rubber grommet can be installed upside down. If it is the air circulator will not fit in. Left me scratching my head for a minute or two. Once that was in the right way it was a done deal. If I had put that in right the first time the replacement would have taken half the time. What a great company!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sandra from Slinger, WI
- Parts Used:
- WP22003262
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Socket set
We had a leak in the tub pump hose
It was very easy...we ordered the part and it only took a day and a half and it was here.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lauraine from Kimberling City, MO
- Parts Used:
- 12001788
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers, Wrench (Adjustable)
Started smelling rubber burning during spin cycle
I thought for sure the washer was toast! Thankfully, due to your website it was an easy 26.00 fix. Husband took care of the repair in about a half an hour. He did not encounter any problems with the fix and it's running like a charm!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joseph from Orlando, FL
- Parts Used:
- WP22003275
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Front-load washer leaked.
Replaced the inside door panel. Who needs a Maytag repairman! Thank you for the great instructional video.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Erzsebet from Vista, CA
- Parts Used:
- WP22003275
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Plastic inner door was cracked washer was leaking.
Replaced it with the new inner dooor.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gloria from Prairie City, OR
- Parts Used:
- WP22003275
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Inner door panel had a hole in it
Ordered a new inner panel and had my son in-law put it in for me. He is a mechanic so it was a quick an easy fix.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Norma from Donald, OR
- Parts Used:
- WP22002798
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Door sagging
The service representative knew exactly what was needed from the description of the problem that was given to her. The hinges were received within a few days. The door was removed and the hinges were replaced and it does not sag anymore. Thank you for your great service.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Terry from Battle Creek, MI
- Parts Used:
- WP22003275
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Washer leaked water down the frount.(frount load washer)
Removed the door removed the hinges removed the screws holding the inner door in place removed all the parts under the inner door put everything back together in the opposit order from taking it out replaced the door wala! finished
Was this instruction helpful to you?
Thank you for voting!