Models > T1642HGPSV > Instructions

T1642HGPSV (ABWEVUS) LG Washer - Instructions

Jump to:

All Instructions for the T1642HGPSV

Customer:: Kristen from Safford, AZ
Parts Used:: AGZ72909711, 5006EA3009B
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers, Socket set

Washer pulsator was coming loose during wash cycle.

Since the old pulsator had actually come off during a wash cycle, I was able to place the new one on easily. Tightened the screw with a socket. Then placed the new cap on. Before placing the new pulsator on, I was able to clean all the mold and hard deposits off the mechanism under the pulsator. The hard deposits were also scrapped from the pulsator holding (where the screw goes) which may have caused the problem to begin with.

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Marilyn from THOMASTON, GA
Parts Used:: AGZ72909711
Difficulty Level:: Very Difficult
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver

could not get the 10 mm nut to loosen

Tried everything and could not get it out I just use mesh bags for washing at this time, but LG washing machine is the worst I have ever had

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Jim from Crystal Lake, IL
Parts Used:: AJU75152601
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins

During the spin cycle water continued to flow into the machine.

unplugged machine, turned off water valves. Moved machine away from the wall. Disconnected supply lines. Removed cover housing water valve assembly.
Took a picture with phone. Disconnected water and electrical wires. Removed water valve assembly . Installed new assembly ,cover and reconnected supply lines, plugged power cord in, turned on water supply valves. Done.

1 of 3 people found this instruction helpful.

Was this instruction helpful to you?

All Instructions for the T1642HGPSV