Models > T1227AGPPH > Instructions

T1227AGPPH (ABWEEHD) LG Washer - Instructions

Jump to:

All Instructions for the T1227AGPPH

Customer:: John from TUCSON, AZ
Parts Used:: MEF62462103
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins

Lid hinge pin receptor (MEF62462103) broken

Remove cover over associated hinge pin assembly and the hinge assembly behind it. With the lid open, remove 4 screws holding on the top assembly, lift and rotate it on its wire cable side and rest it on the machine top frame (it may be necessary to remove the 2 cable restrainers to gain enough play to do this - you will have to remove the large rear cover to accomplish this and be able to reinstall these restrainers). Remove 2 screws fastening the broken hinge pin receptor, install new unit, and fasten with these 2 screws. Install top assembly and a new/repaired hinge pin assembly (most likely the reason for the broken hinge pin receptor).. Replace cable restrainers and rear cover if it was necessary to remove them. Note: These hinge pin assemblies are sold as a set (1 left, 1 right; they are not interchangeable and are expensive). Time to do repair = about 30 minutes.

3 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Terry from SIMI VALLEY, CA
Parts Used:: AEM73732901
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers

Drain hose had a pin hole leak external to washer

Very close to the installation video online at Parts Select. Removed the back panel, unclipped the hose from the inner fitting and replaced with the rear hose. Why it didn;t leak on the inside is interesting as there was no clip on the at the inner fitting.
The one difference from the existing install video online was that I didn't have to tip the washer over ~75 degs before replacing. I instead found that I could put to cinder blocks under the back edge to replace the drain hose. This made the job quicker without having to worry about having a box for it to rest on (with any risk of falling to the floor).

2 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Marilyn from THOMASTON, GA
Parts Used:: AGZ72909711
Difficulty Level:: Very Difficult
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver

could not get the 10 mm nut to loosen

Tried everything and could not get it out I just use mesh bags for washing at this time, but LG washing machine is the worst I have ever had

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Richard from DICKSON CITY, PA
Parts Used:: 6323EL2001G
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Washing machine was displaying te code. Quick google search to diagnose the issue.

Very simple repair after watching YouTube video on how to complete repair.

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: cathy. from etna, OH
Parts Used:: AEM73732901
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

WATER WAS NOT SHUTTING OFF

I HAD A CHAT WITH LG EXPLAINED THE PROBLEM . SAID IT WAS THE WATER SHUT OFF VALUE. V EVEN SENT THE PAGE WITH PART# TO ORDER ONLINE.

LOVE LG CHAT!!!

3 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Roger from Bradenton, FL
Parts Used:: AAZ72925601
Difficulty Level:: Very Easy
Total Repair Time:: Less than 15 mins

Detergent and Softner dispenser was not working peoperly

The old dispenser is removed by slightly raising the front as you pull it out of the housing slot. To install the new dispenser, keep the front slightly tilted up and insert the new dispenser into the housing alot

3 of 12 people found this instruction helpful.

Was this instruction helpful to you?

All Instructions for the T1227AGPPH