41741122310 Kenmore Washer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Melissa from Colorado Springs, CO
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Door striker was broke
unscrewed the 2screws from the striker on the washer door first. Then put screwed new striker on door with its new screws. It was a piece of cake.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- donna from gardnerville, NV
- Parts Used:
- 134762010
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
not cycling
put new part did reset on main controles
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from Cos Cob, CT
- Parts Used:
- 131763302
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Door on washer broke lots of laundry to do!
I was amazed at how quickly my part came for the washer and it came to me on a Saturday
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Janet from Boise, ID
- Parts Used:
- 131763302
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
plastic end of strike broken
I didn't have the right tool, so asked my handyman neighbor to come do a few projects and he had the driver in his pocket screw driver. it is a tip that is included in many multi-tip drivers. two screws removed the old and replaced the new. cheaper than local parts place, and no repair man. thanks
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Fullerton, CA
- Parts Used:
- 131763302
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Nylon door latch broke off. Poor design. The hinges on the Affinity washer and dryer have hinges that won't keep the latches aligned, so the strike hit the body and broke off.
Repair was easy. Two screws held it on. It's set into the door, so there is no adjustment. However, I should have bought a couple of extra ones, because the design problem is still inherent, and it will break the next time somebody is in a hurry and "slams" the door, or pulls it open before the cycle is completed. The ten pound door is held by a stike less than 1/8" thick.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Darci from Norwalk, CT
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Doors tricker broke
The repair was so easy!!! It took me less than ten minutes to remove the broken piece and to install the new piece. There were 2 screws to remove to get the broken piece off.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- patricia from portsmouth, NH
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Door strike broke due to door being off center
took the 2 screws out, removed the old and screwed in the new.Piece of cake. What stod out in the process was Part selects follow up with email and video of how to replace. They are great....
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Wayne from Piedmont, OK
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
broken door strike
unscrewed broken one and screwed the new one in place.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bonny from Woodbridge, VA
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The plastic striker on the front loader door broke off, preventing the door from locking and thus, the washer wouldn't start.
I merely unscrewed the two screws at the top and bottom of the striker, removed the broken part, and screwed on the new one. It probably took about five minutes. I was very proud, as I was able to identify the problem, order the part and install it without involving my husband :-)
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from Searcy, AR
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Broke the strick on the door. Would not stay closed.
Got on line order the part from PartSelect. Got the part quick and the instructions was so easy my wife fixed it.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joyce from Mequon, WI
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The door strike broke off so the door would not stay shut
I took off the broken part with a screw driver. I easily found the needed part on your website. After I ordered the part, it came within 2 days. It was the correct part and was replaced within 10 minutes of opening the package. Thanks for the great, easy and quick service!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Pamela from Charleston, SC
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Lock on Washer Door broken and would not work
I order the part from this website. I want sent to me in 1.5 days. I removed the srews form the broken latch on the door. I place the new latch on the door, than use a phillip head screw driver and attach the latch to the door.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- aurora from denver, CO
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Broken door latch
Unscrew broken door latch and re-screw new one in.
Was this instruction helpful to you?
Thank you for voting!
Washer would wash but not spin out
Washing machine would wash but during spin out phase would just rotate a couple times and then stop never entering fast spin phase. Read about the same problem on this site and decided to order the locking mechanism replacement. Took off back two screws to top of the machine, took out two screws to locking mechanism in door, removed and unplugged old mechanism, plugged in new mechanism and replaced all screws and top. Washer works perfectly. Easy fix, took less than 15 minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sheree from Clarksville, TN
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Door strike snapped
The door strike on our front loader snapped, thanks to numerous family members slamming the door. I don't know much about repairing appliances, actually, I didn't even know the part we broke was called a 'door strike'. Desperate to regain the use of my washer, I took to the internet superhighway and found PartSelect. PartSelect is such an outstanding shop! Thanks to their forward thinking by using grids, photos to scale, and helpful additional info, I easily found the part I needed (and learned the part's name!). And, my part arrived in one day! On a Saturday! PartSelect will be my go-to shop from now on!
Was this instruction helpful to you?
Thank you for voting!