41741122410 Kenmore Washer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Sandra from Isle of Palms, SC
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Door not aligned, always had problem closing door, alignment has been addressed several times, cheaper to change striker.
Unscrew 2 screws. Replace part by screwing the 2 screws back in place. Parts received in 2days part replace less than a minute
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Darci from Norwalk, CT
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Doors tricker broke
The repair was so easy!!! It took me less than ten minutes to remove the broken piece and to install the new piece. There were 2 screws to remove to get the broken piece off.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- teresa from brooklyn, NY
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The top striker tip broke off....
Remove the broken striker, screwed in the new one in less than 2 minutes...this is the second time it was replaced...the first time I was still under warranty...he took about the same amount of time to install ...I ordered 2, because I know it will be broken again....
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Shari from Raleigh, NC
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
door strike broke while moving
very easy, just put in the 2 screws and it was fixed..
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- james from egg harbor twp, NJ
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
broken door striker
first problem is the hinge get worn or broken from being leaned on. second problem is the door gets slammed trying to close it braking the striker. to fix the problem 2 screws for the striker, to permanently fix repair door hinge. and a big thank you for the people who own and or run this site. my order was lost and they got the part to me the next day.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kamlyn from Huntington Becah, CA
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
latch to door broke and would not stay shut
I unscrewed the two screws and replaced with new door striker and used the same two screws I took out. It took me seriously less than 2 minutes and I am a woman!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Janet from Charleston, SC
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Door strike broke off, washer would not run
Unscrewed two phillips head screws, removed damaged part, screwed on replacement part. Presto! Washer works again. I especially appreciated receiving the part less than 48 hours after I ordered it with only regular shipping charge.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Doris from Hesperia, CA
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
tip of strike broke off
unscrewed (2) screws, took broken piece off and screwed new piece on with the (2) screws. Keep your old screws because part does not come with screws.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- patricia from portsmouth, NH
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Door strike broke due to door being off center
took the 2 screws out, removed the old and screwed in the new.Piece of cake. What stod out in the process was Part selects follow up with email and video of how to replace. They are great....
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- H. Edward from Sequim, WA
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Someone opebed the washer door prior to cycle completion
two screws took off the old plate, replaced the door strike with saame screws
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- edward from ottawa, IL
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Plastic on door broke.
Removed two screws, installed new piece.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dallas from Takoma Park, MD
- Parts Used:
- 131763302
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
Broken door strike leading to broken door lock and switch assembly
Replacing the door strike is very easy. Two screws. The broken pieces stay in the door lock/switch assembly. The first time I got them out with needle nose pliers. A year later it happened again and this time I had to replace the lock/switch assembly. I followed procedure others mention here: Two screws at back of washer release the top. Slide that back. Then undo the two screws in the front of the assembly and lift it out, and replace. The important thing is that the door on the washer no longer aligns with the door lock/switch assembly, so we have to carefully (!) lift it to shut it. Do not slam. The issue with the door arises because instructions say to keep the door open so that mold does not grow in the basin. But the hinge on the door is not strong enough to support the door as it stands open when at rest over the years and it has begun to give way. This washer needs a new and stronger hinge. Meanwhile, do not slam your door. Shut it gently, lift if necessary, even on a new machine!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from Chandler, AZ
- Parts Used:
- 134366400
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Front glass broke
The front loading washer door was wobbely so I took it apart as per wife request. Hinge looked fine, bushings were fine so I started to put it back together... then the glass slipped out and to the ground. Take the time to remove the door hinge and assemble on a flat surface, then place the whole assemble back on the washer machine. Don't try to take door apart while still attached to machine. Try it you will understand and then you will be buying a new glass front.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from Searcy, AR
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Broke the strick on the door. Would not stay closed.
Got on line order the part from PartSelect. Got the part quick and the instructions was so easy my wife fixed it.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bonny from Woodbridge, VA
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The plastic striker on the front loader door broke off, preventing the door from locking and thus, the washer wouldn't start.
I merely unscrewed the two screws at the top and bottom of the striker, removed the broken part, and screwed on the new one. It probably took about five minutes. I was very proud, as I was able to identify the problem, order the part and install it without involving my husband :-)
Was this instruction helpful to you?
Thank you for voting!