11046747801 Kenmore Washer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Michael from Tonawanda, NY
- Parts Used:
- WP8183270
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Door would not lock
Did the repair just like the video on your website. Was really easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Suzanne from MENDON, MA
- Parts Used:
- WP8182119
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
Machine was leaking from side.
We do not wish to have our repair published. The part itself was perfect and corrected our leaking problem but we did have difficulty with the installation despite detailed instructions. We appreciate a good price for the perfect part!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Brenda from PLYMOUTH, IN
- Parts Used:
- 280187
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Socket set
WASHER WOULDNT DRAIN F21
REMOVE HOSES AND POWER PLUG REATTACH EVERYTHING AND THEN DONE.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jimmy from MEMPHIS, TN
- Parts Used:
- WP89503
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
Old hot water inlet hose had budge at both ends.
Turn water off at the inlet valve of hose you are replacing. Disconnect inlet hose the washer and let water drain out in a bucket. Then remove old hose. Replace new hose to inlet valve then washer . Use pliers to tighten both ends. Turn on water to check leaks at both ends of hose.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Salt Lick, KY
- Parts Used:
- WPW10467289
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Washer posting a f6 error
This was an easy fix . PartSelect was quick and had all the info I needed to repair my washer. Plus shipping was super fast. Thanks
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dave from Edgewater, NJ
- Parts Used:
- WPW10415587
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Pliers
Error Messages: "SUD" and "F35" Aborted Wash Cycles
Confirmed the issue was not a blocked trap at teh base of teh machine. Renoved the top of the machoine (Three 7mm hex-head sheet-metal screws). Removed the small hose (rubber tube) from the Water Level Pressure Switch. Confirmed the hose was not blocked or constricted. Removed the failed Water Level Pressure Switch by pinching the spring-retainer with needle-nose pliers. Mounted the replacement WLPS. Connected hose. Tested the machine. PartSelect online catalog and delivery service was painless, quick, correct, only a little over-priced and easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Anne from Chester Springs, PA
- Parts Used:
- WP8182233
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Washer baffle came off,plastic claps had broken
It took me a minute to put the baffle in place. The piece got here in one day. I would order again from here if I ever need any parts for any of my appliances. Thanks Anne B.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Randy from Monett, MO
- Parts Used:
- WPW10415587
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
5UD and F35 errors, would not run.
unscrew the top 3 screws that hold the top lid on. Locate the pressure switch on the back right side, near the top. Pop off the pin plug (wire pack)and pull off the black hose. Put the pin plug into the new switch then put the black hose on. I did notice that the new pressure switch was a little bigger than the old one. It did not want to pop into the retainer clip location so I just let it dangle. Its not a problem. Washer works like new.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Rohn from Libertyville, IL
- Parts Used:
- 280187
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Pliers
Drain codes
After diagnosing codes noticed no drain replaced pump asm
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Normalyn from Newark, DE
- Parts Used:
- WP8182233
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken drum baffles fell off and made holes in my clothes
Easy peezy!! Next day delivery, as promised for parts that could not be found anywhere else. I placed the baffles in the washer and clicked them in using both hands one by one. I'm petite and weigh about 110 lbs. The total installation time was less than 2 mins. I was given a $200 quote just for installation but, spent less than $100 and installed myself. Thank you!! I will not wait so long and shop around next time. I'm going straight to partsect.com to save time and money. Although I have to buy new clothes now since my washer put holes in all my clothes. But, the problem is finally solved and I am so grateful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Susan from Rock Hill, SC
- Parts Used:
- WPW10121596
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Divider Broke
I just put the divider in the dispencer
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Elizabeth from Brandon, SD
- Parts Used:
- WPW10388414, WPW10415587
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The washer would show "sud" and then the wash cycle would stop and it would show an F35 error
There are three screws in the back panel at the very top. I unscrewed them with a T25 driver tip and pulled the top panel off the machine, the water level pressure switch was located in the right rear corner of the washer. ( If you are facing the washer) I pulled off the hose and unplugged the old switch, popped the switch out, and snapped the new one in re-attached the plug and hose, put the top panel back on and the three screws back in! All in about fifteen minutes. My washer works like new.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Patrick from Maxwell, IA
- Parts Used:
- WP8182233
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
One drum baffle broke off drum
It took less time to repair than it took to get new baffle out of the packing sleeve. Set it in drum and snapped it in place. Took about 5 seconds.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jerome from kinards, SC
- Parts Used:
- WP8182233
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
had no problem
Placed baffle in drum over slots pushed down on it and slid it back to lock it in place. You will hear it click.
Was this instruction helpful to you?
Thank you for voting!