Models > GTW525ACW0WB > Instructions

GTW525ACW0WB General Electric Washer - Instructions

Jump to:

All Instructions for the GTW525ACW0WB
46 - 52 of 52
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Nancy from ALTON, IL
Parts Used:
WH01X24180
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Belt frayed tangled stopped spinning
Tilted washer got underneath took off plastic shroud 3 nut head bolt rotated belt onto pulleys easy peas when ya buy the part from this site :) perfect match no assy issues
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
PAUL from LANCASTER, CA
Parts Used:
WH43X34257, WH43X31240, WH43X24454
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Agitator bad had cracked and broke, catching pants tie strings.
Able to unscrew center auger real easy using oil filter wrench (for grabbing old auger easily). Used my deep socket wrenches with a speed handle to remove bolt. Then swapped everything out.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Joyce from BOSSIER CITY, LA
Parts Used:
WH43X24454
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
inner part of fabric softener dispenser base broke off
looked up part not exactly easy. that was the hard part. it was delivered next day and just had to pop into place extremely easy instalation
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Heath from BOILING SPGS, SC
Parts Used:
WH01X24180
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Noisy
Took bottom cover off think three bolts
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Debbie from Kalispell, MT
Parts Used:
WH43X31240
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The washer agitator/auger broke off of the base during a wash cycle. The small plastic clips broke off the auger so it couldn't be put back on the base.
The agitator/auger was easy to replace - it just snapped into place. We watched a YouTube to make sure to lock it into the counter clockwise direction.
This saved lots of time and the cost of a repair person to come.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ronald from Chickasha, OK
Parts Used:
WH23X28418
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Washer wouldn’t drain
Remove old pump install new one. Three bolts and an electrical connection
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the GTW525ACW0WB
46 - 52 of 52