FAFS4474LR0 Frigidaire Washer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Cheryl from Brandon, FL
- Parts Used:
- 131763256
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers
Washer would spin in any cycle
Tilted the washer back to take the 2 screws off the bottom to remove bottom plate. Took the 2 nut screws from the bottom of the face plate so that the front of the washer would pull slightly out from the bottom. Removed the 2 screws from the door stricker plate which allowed the door lock assembly to come out through the side of the washer. Unplugged 3 plugs, plugged the new switch in and slid it back into place, put the 2 screws back in to hold it. Reattached the front and the bottom plate. And bingo done. It worked and saved us about $245.00. Very happy!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jeffery David from Chesaning, MI
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Bkn door strike
Very simple hardly worth writing about.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from Cos Cob, CT
- Parts Used:
- 131763302
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Door on washer broke lots of laundry to do!
I was amazed at how quickly my part came for the washer and it came to me on a Saturday
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Richard A. from Newnan, GA
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers
Hungry dog ate the door latch on my front-load washer
ordered the part and got the part in three day. A no hassle experience. Installed the latch and eureka! Fixed!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Garry from Winchester, IN
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Broken Door Strike
Nothing to it rteall. The great thing was how fast this company got the part to me!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Melissa from Colorado Springs, CO
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Door striker was broke
unscrewed the 2screws from the striker on the washer door first. Then put screwed new striker on door with its new screws. It was a piece of cake.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- donna from gardnerville, NV
- Parts Used:
- 134762010
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
not cycling
put new part did reset on main controles
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- david from San Diego, CA
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Machine would not start
Unscrew the the bad part, screw on the new part
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jason from Haymarket, VA
- Parts Used:
- 131763256
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
Washer would agitate but not enter spin cycle
Washer error code said control board($200.) but this web site said Door Lock and Switch assembly($80). Web site was correct, thankyou for saving me money and time for the real repair needed.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- david from edinboro, PA
- Parts Used:
- 131763256
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
machine would not go into final spin, clothes saturated
with the help of my nephew, we unstacked dryer after power sources were shutoff first. then simply removed the two screw attaching lid on washer. then removed two screws holding switch from front of machine. fished switch up to a visible area, exchanged bad for good. fed switch back to it's home,then reversed assembly procedures. these forums are great and have saved me money by enabling the repair both washer and dryer at a very reasonable cost without the need of a certified repair person.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Phil from sun lakes, AZ
- Parts Used:
- 131763256
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
door wouldnt stay locked during cycle
took the top off removed the old one and put in the new one.Works great!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Cindy from Sacramento, CA
- Parts Used:
- 131763256
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
The Part was very difficult to reach from the top.
There was not a video available on your site so I went to U-Tube and found one. Instead of reaching the part from the top I took off the rubber boot from the front and it was so much easier. Once I found and watched the video the entire repair took about 15 minutes. Now the washer works like new!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- clyde from tunkhannock, PA
- Parts Used:
- 131763302
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver, Screw drivers, Wrench set
Would not fill with water
Installed New shock absorbers and new door strike. The existing broken shock absorbers caused the drum to oscillate and pull wires from door lock switch.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Janet from Charleston, SC
- Parts Used:
- 131763302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Door strike broke off, washer would not run
Unscrewed two phillips head screws, removed damaged part, screwed on replacement part. Presto! Washer works again. I especially appreciated receiving the part less than 48 hours after I ordered it with only regular shipping charge.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sharon from Tampa, FL
- Parts Used:
- 131763256
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers
Door would not lock shut
Everything went great, except replacing the rubber seal, that was a little bit harder to put back in place. But other then that, went very well and easy to repair.
Was this instruction helpful to you?
Thank you for voting!