Models > FWS1649ZAS0 > Instructions

FWS1649ZAS0 Frigidaire Washer - Instructions

Jump to:

All Instructions for the FWS1649ZAS0
76 - 90 of 144
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Prince from Murfreesboro, TN
Parts Used:
134844410
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Selector knob broke
Took it out of package..pushed it on.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
randy from island park, NY
Parts Used:
134844410
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Broken knob
Extremely easy. From finding the part on the website to installing on the machine.
19 of 608 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Beverly from Spring, TX
Parts Used:
134844410
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Knob that turns on the dryer had been broken for over 4 years.
It is so great to be able to turn my dryer on now without using my bare hand to turn the shaft that the knob was to go on. Nothing needed other than pushing knob in place. I so wish I had thought of looking online for a replacement part 4 years ago. Thanks!
19 of 608 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gary from Terre Haute, IN
Parts Used:
134844410
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
selector knob broke
I ordered replacement knob for washing machine. It arrived by fedex in 3 days. Ordering was easy and transaction went as smooth as it could. I will order again if needed.
19 of 609 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Andrew from Cambridge, MA
Parts Used:
134844410
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
broken knob
Just put the new one on! Absolutely great service!!!!
A+++++++++++++++++++++++++++++++++++++
39 of 1228 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
William from Crestview, FL
Parts Used:
134844410
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Broken knob.
Pushed on new knob.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Richard from Lafayette, LA
Parts Used:
134511600
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Washer would not spin
watched the video, all instructions were perfect!
Was this instruction helpful to you?
Thank you for voting!
Customer:
William H. from Warsaw, OH
Parts Used:
134101800
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
The washer lid lock was burned
UNPLUG APPLIANCE....very simple installation. Raise THE top and the switch is in the corner. Unplug the wiring harness and remove the 2 screws that hold the lid lock on. Reverse the procedure and replace the lid lock.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Barbara from Calexico, CA
Parts Used:
134418700
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers
Drive block fitting problem
The drive block spline was loose in the Agitator, for the now block to fit tight enough to stay in place while reassembly of the Agitator, ( keep falling out) the old block had to be driven out. Had to design a wire tool to hold the block in place until the Agitator could be fitted over the shaft and seated tight on the shaft drive, then pulled the wire out. Wasn't the most easy task to do and sure took more than 5 min. to install.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Barry from Mohrsville, PA
Parts Used:
134511600
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
20 year old v belt finally gave up the ship
This repair couldn't have been easier. I went to the website, looked up my part and ordered it - this all took longer than the repair! I followed the super easy video on the site walking me through the replacement step by step. I probably would have taken less time, but I made the mistake of propping the top of the washing machine up too high, which popped a suction hose that prevents the tub from overfilling, which unfortunately, I didn't realize. 10 minutes, I started to do a small test load. Luckily, our laundry is right off of the kitchen, so after 5 minutes of filling, I stopped eating dinner to ask my wife how long it took to fill. At that, we could hear the water running on to the laundry room floor. Another trip to the internet and sure enough, attaching that hose fixed her right up. Thanks Partselect! Couldn't have made my life easier - much to the chagrin of my wife who was searching feverishly through the paper for a replacement!
Was this instruction helpful to you?
Thank you for voting!
Customer:
Daniel from Daingerfield, TX
Parts Used:
134211701
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
hose leaking
lifed the lid .remove oud hose and replaced with new hose
Was this instruction helpful to you?
Thank you for voting!
Customer:
Millard from Grand Prairie, TX
Parts Used:
134511600
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Belt Had Smoked
Took front off and put the new belt on. Then put the front back on. At my Age 70 yrs did good and saved $124.00 Which I paid that 9 months ago.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gregory from Piscataway, NJ
Parts Used:
131862900
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Replace belt
Hard to reach around the motor and gear box to attach the belt and pulley not much room. Harder to put the front pannel back on than take off
Was this instruction helpful to you?
Thank you for voting!
Customer:
Karrie from Boulder, WY
Parts Used:
134511600
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
worn belt
Have you spouse take the washer apart and fix it. He did it in no time.I was able to order the parts and have them shipped. They where here in no time Thank you PartsSelect.com
Was this instruction helpful to you?
Thank you for voting!
Customer:
Joseph from Trinidad, CO
Parts Used:
134511600
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
burning smell from wash, needed new drive V belt
watched the video on website, printed instructions for feedback.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the FWS1649ZAS0
76 - 90 of 144