CFW4700LW0 Crosley Washer - Instructions

unscrewed broken one and screwed the new one in place.

I unscrewed the old one and screwed the new one in. It was that easy and took me 5 min. Thank you Part Select!

unscrewed (2) screws, took broken piece off and screwed new piece on with the (2) screws. Keep your old screws because part does not come with screws.

Ok, so I went to wash clothes and my Frigidaire Affinity wouldn't come on because it said the door wasn't locked. The switch had gone out. I researched it and bought it here. When we got it, I looked up a video on Youtube that was less than 2 minutes long. My husband and I watched it and then did the repair! It took us only a few minutes and then the washer worked! We saved time and at least $150! And it was so easy to do that I probably could have done it without my husband, and I'm not the handy type.

I merely unscrewed the two screws at the top and bottom of the striker, removed the broken part, and screwed on the new one. It probably took about five minutes. I was very proud, as I was able to identify the problem, order the part and install it without involving my husband :-)

I order the part from this website. I want sent to me in 1.5 days. I removed the srews form the broken latch on the door. I place the new latch on the door, than use a phillip head screw driver and attach the latch to the door.

Followed your instruction,simply removed the top cover and the two screws on the door to remove the switch assembly. Unplug old part and replaced with the new one after pluging three wires. I saved $105.00, which was the quote from a repair shop. Thank You for your great service and directions; the part arrived a day after I had ordered, did not pay extra for special delivery.

Unscrew broken door latch and re-screw new one in.

Washing machine would wash but during spin out phase would just rotate a couple times and then stop never entering fast spin phase. Read about the same problem on this site and decided to order the locking mechanism replacement. Took off back two screws to top of the machine, took out two screws to locking mechanism in door, removed and unplugged old mechanism, plugged in new mechanism and replaced all screws and top. Washer works perfectly. Easy fix, took less than 15 minutes.

The door strike on our front loader snapped, thanks to numerous family members slamming the door. I don't know much about repairing appliances, actually, I didn't even know the part we broke was called a 'door strike'. Desperate to regain the use of my washer, I took to the internet superhighway and found PartSelect. PartSelect is such an outstanding shop! Thanks to their forward thinking by using grids, photos to scale, and helpful additional info, I easily found the part I needed (and learned the part's name!). And, my part arrived in one day! On a Saturday! PartSelect will be my go-to shop from now on!

two screws took off the old plate, replaced the door strike with saame screws

Removed retaining band around door boot and prized-off boot on left side to access door lock - simple screw driver replacement job. Deleted last error code. BUT - washer worked again for several days, and now code E43 is back and won't spin - problem is intermittent - so suspect it is NOT the door lock, but a wiring or control board problem. Ongoing.

Removed two phillips screws. Removed old door striker. Replaced with new door striker. Replaced old phillips screws. Job takes less than 1 minute.

Take a deep breath and say, "I can do this. I will not pay well over $100 for someone else to come and do it."! Identifying part easy, mail very quick, web instructions clear, took out two screws, slipped out old part, put in new one, replace screws. I loved every minute of it and it cost $16.20 (part and shipping). Thanks, Part Select!

Removed two screws on the back of the washer top to release the top on the washer. Slid the top off and removed it. Opened washer door and removed two screws securing the door lock assembly to the washer frame. Reached in from the top of the washer to get the door lock assembly. Unplugged the old door lock assembly in three places and plugged the new assembly in in the same three places. Placed the new assembly in the same place as the old one and secured it to the washer frame with the same two screws located on the inside of the door. Replaced washer top and secured two screws at the top back edge of the washer... Tried the spin mode and everything worked great!!!