GTUP270EM4WW General Electric Washer Dryer Combo - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Dryer Drum was squeaking very loudly
watched the Video on PartSelect.com Before I did the repair. . ordered the parts that where suggested.. Once the parts arrived to my home I again watched the repair video and proceeded to do the dryer repair with ease! I replaced the Drum Bearing slide, Front Drum Bearing and the Drum Bearing Slide.. It was a very easy repair to do and saved me a lot of money by doing it myself! The Video that showed how to do the repair was very helpful as well. .
Was this instruction helpful to you?
Thank you for voting!
Clothes would get caught in the drum slide
The clothes would get caught where the drum slide should be (it was almost totally worn down) and would leave black marks. I watched Parts Select youtube video. Bought the parts needed from Parts Select. They arrived within a couple of days. I replaced the 2 drum slides and no more getting caught. Took about 20 minutes.
Was this instruction helpful to you?
Thank you for voting!
Dryer was making loud noise when in use.
first, I watched the helpful videos. I then removed the screws that are located inside the door and screws from for top panel to remove front and top panel. When I opened the front panel I saw that the front drum bearing was half destroyed from the years of drum rubbing. I Replace front drum bearing and slides and now dryer sounds like a brand new quiet dryer.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Glenn from Prairieville, LA
- Parts Used:
- WE03X29897, WE3M26, WE1M504
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
Noise while drum is rolling and at start up
Reviewed problems with the dryer on line and ordered the parts. The only problem is that it takes two types of slide bearings which I did not order correctly. The video was great and had no problem installing the parts.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Betty from Oakville, IN
- Parts Used:
- WE4M181
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
The dryer was not heating up
We watched the video of how to take the dryer apart and how to install the thermostat...after watching the video it was pretty easy
Was this instruction helpful to you?
Thank you for voting!
Dry squealed so loud you needed ear plugs!
The repair was extremely easy to do. The video was perfectly done and described everything one needed to do in very simplistic details.
Was this instruction helpful to you?
Thank you for voting!
Loud stretching
My dryer was making a loud stretching sound which I thought, because of previous experience, could be fixed by replacing the bearing slides. The problem turned out to be that the blower wheel that is attached to the motor was loose. I pushed the blower wheel all the way in so that about 1/4" of the motor shaft sticks out. I then tightened the bolt with a socket wrench. Problem solved.
Was this instruction helpful to you?
Thank you for voting!