Models > WSM2700DAWWW > Instructions

WSM2700DAWWW General Electric Washer Dryer Combo - Instructions

Jump to:

All Instructions for the WSM2700DAWWW
16 - 27 of 27
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Priscilla from SILVER SPRING, MD
Parts Used:
WE16X29397
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Old lint filter was damaged.
Took a chance on the size and luckily filter was perfect fit.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Keelyn from Old Greenwich, CT
Parts Used:
WE01X10160
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The knob that came with the unit was broken
I took the serial and model # off the appliance, located it on your site, purchased it and it was sent within 2 days. Thanks! I think the old one was a defective one because it never worked.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
NICOLAS from LYNN, MA
Parts Used:
WE3X70
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench set
Dryer making squeeky noise.
Removed the Drum and replaced the part....
1 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Albert from Roselle, IL
Parts Used:
WH45X10018, WH08X10004
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set, Wrench (Adjustable), Wrench set
left a drywall screw in my pockit and it cut the tub
I first made a repaire order online and put on the service order that i needed a new tub.
Someone was to call me the the night before but i never got the call the service man was
coming between 8am and 12 he called at 11
and wanted to come and look at the washer to see what parts he needed i told him i put in the service reqwest that it needed a tub and that if he didn't have the tub not to come because i was not going to pay for a service call if he didn't have the parts he did tell me it would cost me $430.00 so i repaired it myshelf
8 of 33 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Randy from Lake Mary, FL
Parts Used:
WE12X10009
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
noisy belt
Removed top of dryer, took screws out of back of dryer, pulled drum off front of dryer, removed old belt and slid new one in place. Reattached drum to front and slid belt in place only to find it was the wrong size. Called an appliance repair man, he said happens more ften than not.
Was this instruction helpful to you?
Thank you for voting!
Customer:
GARY from HALEYVILLE, AL
Parts Used:
WE3X70
Difficulty Level:
Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Wrench (Adjustable)
Lack of grease caused bearing to go out
I took the top and front off the dryer. I then took the screws out of the drum and removed the drum. I then took the old bearing out and put the new one in.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Bob from Riviera Beach, FL
Parts Used:
WH07X10009
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Spin cycle not spining sufficient water from clothes
Remove front of unit. Replace belt that drives the washer. This repair is very easy.
Was this instruction helpful to you?
Thank you for voting!
Customer:
William from Fleming Island, FL
Parts Used:
WE03X10007
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
Dryer drum seized
Had to pry dryer front off drum because buttons had caught between glide and felt causing excessive heat that melted the glide to the felt. Removed old felt from dryer front and replaced glide then reassembled machine. Took longer overall time because I did not realize two glide parts were needed so repair was delayed until second glide was received.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Carolyn from Orange beach, AL
Parts Used:
WE16X29397
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Old lint filter was bent and screen torn.
Ordered a new lint filter around 2 pm and received it UPS the following day. Popped it in and we're good to go. Could not have been faster or easier!
Was this instruction helpful to you?
Thank you for voting!
Customer:
Joseph from Silver Spring, MD
Parts Used:
WE16X29397
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
filter was busted
Replaced
Was this instruction helpful to you?
Thank you for voting!
Customer:
Linda from Edna, TX
Parts Used:
WE12X10009
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Drum would not turn at full speed, noisy squeak
Top control panel removed; next used screwdriver to lift up dryer top on each side( the top of dryer is attached by clips on the underside) the dryer front panel has two screws, one on each side of inside front(they are easy to reach and near the top of the inside front panel, after removing these two screws we used screwdriver again to pry off front panel as it is attached also by clips on inside of front panel. At this point there is easy access to the drum where the old belt was removed, new belt put in place; removed small panel on back of dryer to access idler pulley and attached new belt through the pulley; turned the drum a couple of times by hand to check if belt was running true on the drum; problem fixed.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Barbara from Staten Island, NY
Parts Used:
WE12X10009
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
the dryer belt broke
very simple my husband put it on in no time
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the WSM2700DAWWW
16 - 27 of 27