Models > PLEB30T8CCB

PLEB30T8CCB Frigidaire Wall Oven

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for PLEB30T8CCB

Viewing 6 of 6

Manuals & Guides for PLEB30T8CCB

Click to download
Keep searches simple, eg. "belt" or "pump".
This is an oven bake element for a range, sourced directly from the original manufacturer. It is located at the bottom of the oven, responsible for supplying heat for the baking function. If your oven...
In Stock
$19.73
Clear, 120 Volt, 40 Watt.
In Stock
This is a temperature sensor for a range. The sensor is what detects the temperature inside the oven and is often replaced when the oven is having heating issues. Please note that the wire connector m...
In Stock
Terminal blocks (also called terminal boards or strips) provide a convenient means of connecting individual electrical wires.
In Stock
$10.90
This is a light bulb lens, and it is made for your oven. This part protects the light bulb inside your oven by covering it. The lens is made of glass, and has a 3-inch diameter. Before making this rep...
In Stock
Retrieving data. Wait a few seconds and try to cut or copy again.
In Stock
$11.23
Size: 3/4 inch od x 1/4 inch id
In Stock
This includes pan and insert.
In Stock
In Stock
$42.78
In Stock
Special Order
$102.29
In Stock

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for PLEB30T8CCB

Viewing 7 of 7
Little to no heat when baking
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Element will not heat
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Oven is too hot
Fixed by these parts
Fixing Fixing
How to fix it
Will Not Start
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Oven not heating evenly
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Little to no heat when broiling
Fixed by these parts
Fixing Fixing
How to fix it
Door won’t close
Fixed by these parts
Fixing Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
  • Customer:
    Van from Sanford, NC
  • Parts Used:
    318255006
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
oven element broken
The repair was simple; first I removed the 2 screws from the old element and disconnected the wires and then I inserted the new element reconnected the wires and replaced the screws . The repair was easy and took less that 15 min. The oven works as good as new and I saved alot of money by doing it myself.
167 of 186 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Dan from Bellevue, ID
  • Parts Used:
    316217002
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Oven not heating to desired temperature
Replaced clock control by removing surface burner control knobs and plastic nuts, and then the cover over the oven control. Two screw hold the clock in place, after removal and disconnecting the plug-in you can reinstall the new clock control. The Heat Sensor inside the oven will also need to be replaced. It is located inside the oven and attached with two screws; the back of the oven will need to be removed to unplug. Reverse removal procedure and turn the power back on to the stove.
149 of 226 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Kevin from Alexandria, VA
  • Parts Used:
    318255605
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Broil element wasn't working...
I pulled my unit out of the wall and noticed that the insulation around the top broiler element was a bit brown. Closer inspection revealed that the element had shorted somehow to the oven itself and caused the element to become non-functional. I tried measuring the resistance first, and it was within typical values for the other elements, but I decided to replace the element anyway.

I ordered from PD and the part arrived just a few days letter by regular shipping. I undid the screws holding in the element, undid the wire connectors and replaced the broken element with the new one. The element worked like a charm and I was back in business for cooking.
90 of 116 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!