Models > BRS70HRBNA00 > Instructions

BRS70HRBNA00 Whirlpool Refrigerator - Instructions

Jump to:

All Instructions for the BRS70HRBNA00
121 - 135 of 171
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Louis from Beloit, WI
Parts Used:
W11384469
Difficulty Level:
A Bit Difficult
Total Repair Time:
Less than 15 mins
Light did not come on (bad bulb!) on TC18KL
I have never before seen a bulb with the filament intact not light. If the bulb's filament seems intact, screw the bulb into a known working lamp and see if it lights. When screwing it back into the socket in the fridge, it takes a bit of extra effort to fully seat (until it does, it won't light!). For replacing the switch, I unplugged the unit, used a paint scraper and worked it under the switch bezel from the right side. A bit of moxie, and the switch came out. The replacement switch had a different spade contact spacing than the original. I used a pair of scissors to cut the rubber bridge between the two switch wire connectors so I could connect to the new switch. In the end, it turned out to be the bulb. NOTE: The Model TC18KL is _not_ listed! What I finally found that the number "P7803211WL" on the sticker is actually a manufacturing code. Found this out by searching, and Sears' part search came up with matches.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Harold G from Lexington, KY
Parts Used:
WPW10296855
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Refrigerator Needed Additional Upper Door Bin
Simply placed bin in proper slots and it fit perfectly.
Was this instruction helpful to you?
Thank you for voting!
Customer:
WILLIAM from Wichita Falls, TX
Parts Used:
WPW10335220
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
No problem
This was a brand new refrigerator. My wife wanted an additional bin for the fridge door. Thanks for having this and shipping promptly.
Was this instruction helpful to you?
Thank you for voting!
Customer:
stefania from miami beach, FL
Parts Used:
EDR1RXD1
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
water filter missing
alone
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from The Villages, FL
Parts Used:
EDR1RXD1
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Water Filter
Replacing the water filter was no big deal. What impressed me was ordering the filter on Friday and having it at my door on Saturday the next day! That is quality service and I felt you deserve a thumbs up on your customer service skills.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Wesley from Las Vegas, NV
Parts Used:
EDR1RXD1
Difficulty Level:
A Bit Difficult
Total Repair Time:
Less than 15 mins
Water filter was due to change. Depending on water quality, you have to change every 6 months.
Pulled the old filter out and plugged the new one in. Make sure you check that both O rings are on the new filter. Firmly push in. I have had an air lock in my ice machine and it took a couple of days before it started to make ice again. Easy deal.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Edward from Lake Mary, FL
Parts Used:
WPW10296855
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Storage bin on refrigerator door missing
installed bin on door.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Steve from River Edge, NJ
Parts Used:
W11384469
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
exchange of defective light rocker switch
1)pry out the old/defective light rocker switch with a screw driver (flat head) and pull out the cables 2)unplug two connectors at the end of light rocker switch 3) connect new light rocker into two connectors 4)push the wires inside and put back new light rocker switch
Was this instruction helpful to you?
Thank you for voting!
Customer:
Anthony from Fairport, NY
Parts Used:
W11384469
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Light in the refrigerator didn't work
I did exactly as the video showed. I popped out the old switch, disconnected the two terminals, connected the new switch and put it back. The light now works! The refrigerator is over 25 years old and the switch works! What a great website this is. Couldn't of done the job without Partselect's help.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Wayne from Studio City, CA
Parts Used:
EDR1RXD1
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Refrigerator needed neplacement water filter
Opened holder removed old filter and replaced with new filter
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dora from Rock Island, IL
Parts Used:
W11384469
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
light would come on and off
Viewed the viedo - it showed what to do
Was this instruction helpful to you?
Thank you for voting!
Customer:
Danny from Fulton, MO
Parts Used:
W10852956
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Ice maker would not disperse cubes through the door
Looked at drawing to see what sequence the parts went.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Huey from Dallas, TX
Parts Used:
WPW10296855
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
needed extra door bins
I simply put them in place
Was this instruction helpful to you?
Thank you for voting!
Customer:
Mary from Wasilla, AK
Parts Used:
W11384469
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Light switch in the refrigerator was faulty from the first day we installed the fridge.
I had ordered some other parts for something entirely different off your website and service was great. So after almost ten years of a dark refrigerator, because of a defective switch, I decided to see if you had the part to fix it... You did and the part got here in 3 days. I had a working light switch and all the light in the world where my husband needed it most (in the fridge). It took me at the most ten minutes to replace the part. All is well now and I have a happy husband who can find the leftovers just fine. Thanks for your great service!
Was this instruction helpful to you?
Thank you for voting!
Customer:
Edgardo from Hackensack, NJ
Parts Used:
WP489235, WP2198661
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Ice not coming out when pressing level outside freezer door.
Remove ice storage container from inside freezer. Remove philips screw from the coupler underneath ice storage container. Removed coupler and flat washer. Installed new plastic coupling and metal flat washers. Relaced original coupler and screw. Tighten screws very carefully. Installed ice storage container and filled it with fresh ice. Ice is now coming out when the level on the outside of the freezer door is pressed. Yeah...
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the BRS70HRBNA00
121 - 135 of 171