WRX735SDBM Whirlpool Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- gary from New York, NY
- Parts Used:
- WPW10498990
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Water inlet valve was leaking.
To replace the water inlet valve was very easy. All you need to do is unscrew the valve from the back of the refrigerator then use pliers to remove the water line then unplug the 2nd line that goes into the frig. Then just unplug the valve from the power cord.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Daniel from Chicago Heights, IL
- Parts Used:
- EDR4RXD1
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Installing the Ice and Water Filter
Take filter out of the box and open the refrigerator. Open the housing in the frig that holds the filter and twist the light-blue piece 1/4 turn, counter-clockwise. (Put the light-blue piece in a safe place.) Take foil away from filter. With 1/4 turn in the clockwise direction, twist the filter into its position. Let five gallons run through the system to get fresh, filtered water.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Milay from Miami, FL
- Parts Used:
- W10882923
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers
Ice Maker stopped working a second time
The customer service was great and I received my part the next day which was awesome. I was a bit surprised that inside the box no instructions came for the installation. It was a bit difficult without the instructions. After an hour we installed the ice maker and it stated working. The one thing I like the most is the one year guarantee. That gives me peace of mind.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Alfred from Erie, PA
- Parts Used:
- WPW10196393
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
noisy
Popped the cover to expose the part. Then removed two screws and unplugged the part. Exchanged the new part for the old. Plugged the new part in and replaced the screws And the cover.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from Portland, OR
- Parts Used:
- EDR4RXD1
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
Replaced ice & Water filter, but message on refigerator still shows "Replace Filter"
As per instructions to replace filter
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Richard A. from Boones Mill, VA
- Parts Used:
- WPW10196393
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Milk was freezing in Refig section, 28 F temp
Noted the Damper Assemby in the upper rear of refrig section,was always staying open during checks for problems. Controls appeared to be controlling temp changes when adjusted. Pulled the damper assemby after removing two screws holding the diffuser/cover(diffuser pops off with screwdriver) Damper assembly snaps out , unplug wires, snap new damper assembly in place, reconnect wires at the plug, replace cover with foam insulation, secure with screws replace diffuser snaping in place. Recheck settings for desired temperatures.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Myra from Baltimore, MD
- Parts Used:
- EDR4RXD1
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The water filter indicator kept blinking red.
I opened the cover to the filter and screwed the filter counter clock wise until it came loose then removed the old filter and put the new one in. It was real easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Dallas, TX
- Parts Used:
- EDR4RXD1
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Water filter change
Easy unscrew remove and install new filter
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- ROY from SOMERSET, NJ
- Parts Used:
- EDR4RXD1
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Filter Needed Replacement
Opened filter area door turned old filter to the left to unscrew. Took out old filter then replaced the new filter and turned it to the right to tighten it, closed cover and that was it all done.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Louis from Covington, KY
- Parts Used:
- EDR4RXD1
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Ice and Water Filter needed to be replaced.
I snapped the cover plate to the filter open. Pulled the filter down and twisted counter clock wise to take filter out. I installed the new filter in by inserting the filter and tuning clock wise to secure the filter. I flushed the water for about two minutes and then allowed it to be put back into service.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Alice from Ocala, FL
- Parts Used:
- EDR4RXD1
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Needed to install new window a/c unit
Placed in window and pulled out sliders.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- William from Bronxville, NY
- Parts Used:
- EDR4RXD1
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
water was slowing down
Unscrewed the old filter and screwed in the new one
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Valentin from CLOVIS, CA
- Parts Used:
- W10882923
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
The ice maker stop making ice.
I looked on YouTube few videos how to replace the ice maker.Then according videos I replaced the ice maker.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Greg from Bentonville, AR
- Parts Used:
- WPW10498990
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
Handel broke at attacth point
R$ R rd the handle pretty easy
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Wilbur from Clayton, NC
- Parts Used:
- EDR4RXD1
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Not Getting Any Water
Thought I needed a new filter. Did not solve the problem. I returned the filter to partselect as per instructions. Will order from partselect when I need parts.
Was this instruction helpful to you?
Thank you for voting!