25331642102 Kenmore Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
needed to replace the end cap on the bottom shelf of the fridge
First I had to remove the popsicle sticks and glue that had been semi-repairing the bracket for 1+ years. Then I popped it back together. Too easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Susan from Northbrook, IL
- Parts Used:
- 240311501
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
End cap broke
Slip the endcap off the door--- no tools required for that. Use flat end of screwdriver to loosen the bracket holding the door bar into the endcap. The bar slides right out, is easily replaced, and the endcap slips right back on to the door.
Was this instruction helpful to you?
Thank you for voting!
Broken door shelf retainer bar.
The retainer bar was missing from a refrigerator in our rental property. A tenant had broken it and thrown it out. I found the model # on the appliance and looked up the parts diagram on the PartsSelect website and found what I needed. I placed the order one day and had the parts 2 days later! Unpacking was the hardest part. The parts just snapped together to make up the complete retainer unit. Then I just fit the unit onto the formed clips on the door shelf. I'd cosider this a " simple" job.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Evelyn from Cleveland, OH
- Parts Used:
- 240331502
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
End cap broke and retainer bar would not stay in place
Popped off the old and slipped on the new. No tools - in less than 5 minutes.
Was this instruction helpful to you?
Thank you for voting!
Rental Unit Refrigerator, broken shelf retainer bar & missing end caps
Need to repair refrigerator for new renters. Ordered parts and received them two days later. Installed retainer bar with end caps into refrigerator door same day parts received.
Was this instruction helpful to you?
Thank you for voting!
They Were Missing
Not much placed the 2 ends on the straight bar & put it in place on the refridgerator door dom russo
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Paul from Springfield, MO
- Parts Used:
- 240505801
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
the refrigerator door was hard to close, and upon inspection I finally decided that the light switch was making the door hard to close.
I removed the door actuated light switch with my index finger and thumb on my right hand. I then removed the two wires from the switch. I noticed that the new switch had different look to it,I think Frigidaire must have had a problem with the original design of the switch. Reassembly was just replacing the two wires and putting the new switch in place, and no more door closing problem.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jodi from Barre, VT
- Parts Used:
- 240311502
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
End Cap on Bottom Door Shelf Retainer Broke
I took the broken plastic cap off and put the new one onto the retaining bar. Then snapped the the bar into place. That was it!
Was this instruction helpful to you?
Thank you for voting!
Refrigerator Door Shelf Bars were broken
These were easy pop in pieces so no tools were needed. Very easy and quick. What I liked best about PartSelect.com was the pictures and labeling used in order to select the correct part. That was my biggest concern. It only took me about 15 minutes to find and buy the parts I needed.
Was this instruction helpful to you?
Thank you for voting!
missing bottom door shelf bracket
Received 3 parts. Snapped them together. Attached them to fridge door.
Was this instruction helpful to you?
Thank you for voting!
End caps were broken/missing on refrigerator
I installed new end caps brackets with bars by putting them in place. Now the refrigerator looks new again. These parts were installed in the door, which was broken/missing. This prevented a person from being able to store anything in the refrigerstor door until it was fixed.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- KIMBERLY from BROOKLYN, NY
- Parts Used:
- 5303918549
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Wrench (Adjustable)
The freezer portion of the refrigerator worked but the fresh food refrigerator did not
I watched the step-by-step installation video and followed the instructions therein.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jack from Kiefer, OK
- Parts Used:
- 5303918774
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Socket set
broke fan blade while trying to remove dust.
Removed old fan motor and installed new one.Not much room for big hands back there.Flexible extensions valuable on this job.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- RONALD from LONG BEACH, WA
- Parts Used:
- 5303918549
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers
Refrigerator warm, but freezer slightly cold
The website said 60% of people with same refrigerator problem solved the problem with a new fan kit. I received the fan kit within 3 days of ordering. Was shipped from Fresno, CA to Long Beach, WA. The fan kit was to be installed behind rear panel in the freezer compartment. When I removed the old fan motor, I noticed the shaft turned harder than the new fan motor, suggesting a problem with the old fan motor. I plugged in the obvious fan motor power bundle with no problem. The instructions and diagram with the kit nearly steered me wrong. Instructions, diagram and splices with the kit instructed to cut the "extra" wire bundle and splice "similar" wires (should have said same color wires). Luckily, I ignored those instructions when I remembered the U-Tube video depicted the extra wire bundle was to be inserted into a factory penetration in the back panel, facing the freezer compartment. This power bundle is for adding an ice maker, which my refrigerator did not have. When reassembled and the refrigerator restarted, I could immediately feel forced air in the refrig, where there was no flow before fixing. I observed that all the refrig and freezer dials do is act like a valve to increase or decrease air flow to the compartments. The dials have no mechanical or electrical connections, just designed to divert air flow from across the cold 'evaporator' fins. I recommend other consumers to remember carefully what they see in the video and watch again if stumped during the job. The video was better than the instructions which may have been written in China or India. I am happy. Repair was a lot cheaper than a new refrigerator and I would not have bought another Frigidaire. Thanks to this website. r. andersen
Was this instruction helpful to you?
Thank you for voting!