Models > 25370622410 > Instructions

25370622410 Kenmore Refrigerator - Instructions

Jump to:

All Instructions for the 25370622410
91 - 105 of 146
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Ann from Metairie, LA
Parts Used:
240350609
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Shattered crisper cover
Received the shelf viva delivery opened package took glass out put in fridge
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kevin from Raymond, NH
Parts Used:
240350609
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Bottom glass shelve broken.
The purchase I made was for a bottom glass shelve of a fridge. I put in the model number and ordered the glass for that model. The glass shipped, was too big and did not fit.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Richard from Boise, ID
Parts Used:
242252603
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set, Wrench set
Ice maker no working
Removed water line. Removed two screws holding valve. Disconnected line from valve going to Ice maker. Replaced screws and water line. Most important thing in working with Parts Select was the information they provided when I called them. I had called electrolux and was given no information and was told they would send out a repairman at which point I told them to get lost. Cost of part $30.00 vs service call of $75.00.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Adriana from New York, NY
Parts Used:
240350609
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
shattered glass crisper shelf
If you're reading this, just buy the shelf and put it in. You have already learned the real lesson: The crisper shelf is more delicate than you thought.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jesse from Woodstock, GA
Parts Used:
242252603
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Valve nut stripped
Old part threads : made in China (brass) New part : made in Mexico (steel). First, unplugged it from the wall. As for the valve, removed the two screws holding the valve in, disconnected the plug, took the pipe cutter, cut the blue line to the ice maker, cleaned up the cut, pushed that line into the new one and reassembled. Done!
Was this instruction helpful to you?
Thank you for voting!
Customer:
HCMA Benefits from Fairburn, GA
Parts Used:
240350609
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Broken Glass Pan Cover
Put the glass in slot and it fit perfectly
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from Cleveland, OH
Parts Used:
240350609
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Broken glass shelf
The glass inserted easily into the space formerly occupied by the original shelf
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dean from Harrisonburg, VA
Parts Used:
240350609
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Broken glass shelve
Got the glass in two days time. Slid into the frame. It took less than 2 min. Great service from nice people. And the price of the glass was less than I expected. Thanks Dean
Was this instruction helpful to you?
Thank you for voting!
Customer:
Joseph from Cape Coral, FL
Parts Used:
242193213
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
Old gasket was torn causing excessive moisture in refrigerator.
Removed door, removed old gasket, cleaned surfaces where gasket sealed, replaced gasket, re-installed door. About 10-15 min.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sheila M from Rosadale, NY
Parts Used:
240350609
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Broke Pan Cover Glass Insert
It slips right on. The hardest was getrthe item unpacked. It was pacrvery well for shipment so it wouldn't get broken. This company has very nice customer service on the phone.
Was this instruction helpful to you?
Thank you for voting!
Customer:
nestor from Edinburg, TX
Parts Used:
242193213
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
door wont close
its real easy, just by pulling the old gasket, in some spots the gasket was like glued, but with a flat screw driver a managed to pulled apart. finally,just attached the new gasket.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from Katy, TX
Parts Used:
242193213
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
torn door gasket
Opened refrigerator door, opened a Corona, took a sip,removed old gasket from its track by simply pulling out of the track with my fingers; took another sip, installed new gasket by lining it up and pressing it into the track with my thumbs (It's good to have opposal digits) starting at the top center and progressing clockwise, closed refrigerator door, minus one Corona. Sat on the patio and enjoyed the rest of my Corona. Life's good!
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jay from Bethel Park, PA
Parts Used:
242193213
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Cracked gasket on fridge door
Used screwdriver to pry off edge of old gasket corner and peeled off old gasket. Snapped new gasket into door channel and made sure all the edges were seated. Took longer to open the shipping package than to do the repair.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Eileen from Ledyard, CT
Parts Used:
240350609
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Crisper cover glass broke.
A no brainer, just unpacked and placed on top of crisper!
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gaylord from Riverside, CA
Parts Used:
242252603
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench (Adjustable)
Ice cubes were half the normal size to none at all
Remove back cover (5 screws )remove valve ( 1 screw ).Disconnect in and out water lines. Disconnect wire on solenoid. Install in reverse. Dont forget to turn off water.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 25370622410
91 - 105 of 146