25331644100 Kenmore Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Evelyn from Cleveland, OH
- Parts Used:
- 240331502
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
End cap broke and retainer bar would not stay in place
Popped off the old and slipped on the new. No tools - in less than 5 minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- KIRUBAKAR from CORONA, CA
- Parts Used:
- 240311501
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The Leftside end cap broke and had to be replaced
Removed the broken piece and snapped in the new piece bought from PartSelect. Later connected the bar between the left end cap and right end cap. All done in few minutes. The new piece fitted well into the location with no issues.
Thanks PartSelect
Thanks PartSelect
Was this instruction helpful to you?
Thank you for voting!
Retainer Bar was warpped.
Snap out the old, Snap in the new. With a "Special Needs" child at home, doors are slammed. Inside retainer bars take abnormal abuse .. Parts Select, "Saves the day" and I have a HAPPY Landlord.
Was this instruction helpful to you?
Thank you for voting!
Rental Unit Refrigerator, broken shelf retainer bar & missing end caps
Need to repair refrigerator for new renters. Ordered parts and received them two days later. Installed retainer bar with end caps into refrigerator door same day parts received.
Was this instruction helpful to you?
Thank you for voting!
They Were Missing
Not much placed the 2 ends on the straight bar & put it in place on the refridgerator door dom russo
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jodi from Barre, VT
- Parts Used:
- 240311502
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
End Cap on Bottom Door Shelf Retainer Broke
I took the broken plastic cap off and put the new one onto the retaining bar. Then snapped the the bar into place. That was it!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Susan from Northbrook, IL
- Parts Used:
- 240311501
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
End cap broke
Slip the endcap off the door--- no tools required for that. Use flat end of screwdriver to loosen the bracket holding the door bar into the endcap. The bar slides right out, is easily replaced, and the endcap slips right back on to the door.
Was this instruction helpful to you?
Thank you for voting!
Broken door shelf retainer bar.
The retainer bar was missing from a refrigerator in our rental property. A tenant had broken it and thrown it out. I found the model # on the appliance and looked up the parts diagram on the PartsSelect website and found what I needed. I placed the order one day and had the parts 2 days later! Unpacking was the hardest part. The parts just snapped together to make up the complete retainer unit. Then I just fit the unit onto the formed clips on the door shelf. I'd cosider this a " simple" job.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- LEVI from SUTHERLIN, OR
- Parts Used:
- 240331401
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Missing Door Shelf Retainer Bar.
Just snaps into notches on each side. Bar arrived bent from shipping. Replacement was overnighted at no extra charge. Great service.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Karen from Roseville, CA
- Parts Used:
- 240311501
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Door brace was cracked
Just popped the new piece into place.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Alicia from Torrance, CA
- Parts Used:
- 240311502
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
My end cap broke as a result of too many things piled in the door rack.
I snapped out the broken piece of the old Door Shelf Retainer Bar End Cap, snapped in the new one and reinstalled the door rack in my refrigerator.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- EDWIN from ELWOOD, IN
- Parts Used:
- 5308000010
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
loud noise fan blade broke,off balance
take 1/4 hex screws out clean out dust ,remove old fan blade replace with new install bolts .
Was this instruction helpful to you?
Thank you for voting!