25331432102 Kenmore Refrigerator - Instructions

The retainer bar was missing from a refrigerator in our rental property. A tenant had broken it and thrown it out. I found the model # on the appliance and looked up the parts diagram on the PartsSelect website and found what I needed. I placed the order one day and had the parts 2 days later! Unpacking was the hardest part. The parts just snapped together to make up the complete retainer unit. Then I just fit the unit onto the formed clips on the door shelf. I'd cosider this a " simple" job.

Received 3 parts. Snapped them together. Attached them to fridge door.

These were easy pop in pieces so no tools were needed. Very easy and quick. What I liked best about PartSelect.com was the pictures and labeling used in order to select the correct part. That was my biggest concern. It only took me about 15 minutes to find and buy the parts I needed.

I installed new end caps brackets with bars by putting them in place. Now the refrigerator looks new again. These parts were installed in the door, which was broken/missing. This prevented a person from being able to store anything in the refrigerstor door until it was fixed.

I needed to cut the bar to fit or return it for the bar that was almost three times the price. The notches to hold the end cap are no longer on that side so I also needed to clamp the metal bar to the end cap.

All three shelved had been broken for years. I finally broke down and bought the parts, and I can't believe I waited so long. The retainers are very easy to install. The bars take some time to measure, and cut, but once that is done, it is very easy to assemble the parts, and get back to having usable shelves.

My husband watched the video on your website and found it very easy to do the repair. The repair company that diagnosed the problem wanted $210 to do it. The part I ordered was under $20, and after he installed it the refrigerator has been working great. We would highly recommend your site to anyone who needs to fix anything!

I watched the step-by-step installation video and followed the instructions therein.

Ordered whole new retainer assembly. New bar was incorrect part, but endcaps were OK, so got old part out of the garbage and straightened damaged areas, used new endcaps, and reinstqalled on door. Works.

took off cardboard removed two screws holding fan housing. Removed new fan and housing from box and mounted new fan to new housing (two screws). Installed new fan and housing. reinstalled cardboard and plunged in power cord. Perfect fit.

We cleaned all the parts we had and did a quick survey of which pieces needed to be replaced. We ordered the parts and they arrived within 48 hours. I snapped the pieces together and put all the shelving back together. I do have one difficult spot where the tab inside the door that the shelving attaches too was also ripped. I filled the spot with super glue and let it set for a day and finished installing the last shelf in a few seconds. The Best News...No more ketchup or juice bottles falling to the floor everytime you open the door!!

Initially, I traced the noise down to the evaporator motor area. I thought it was the fan blade so I ordered and changed it. Noise level better but still not good. Then I ivestigated problem area again. Removed the motor,discoverd that the motor shaft was loose /drifting which caused the "hummm" and uneven fan blade rotation. Orderd and installed new motor and all is good.

purchased a defrost theromast,took about 20-30 minutes to take apart & put back together.delivery was in one day from the time of my purchase.thanks for all ur help &prompt delivery.

jump thermostat,fan and compressor came on, ordered thermo from this excllent parts supplier, part came in 4 days later, it was exact replacement, works exactly right!

Watch the video provided by PartSelect and did exactly the same percedure. Shows what screws to remove and how to remove and replace the part. The freezer compartment was iced up quite a bit so defrosted it before installing part.