5967954901 Kenmore Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Christine from SAN DIMAS, CA
- Parts Used:
- WPW10714545
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
The freezer door was not staying fully closed.
I watched a YouTube video real quick to see what I had to do and got to the job at hand. I removed the old gasket by pulling it out of the track and bring it around the front of the drawer. I wiped down the entire area where the new one would go and started inserting it into the groove, making sure it went in completely in on the bottom. I was done in less than 15 minutes. Super easy! This fixed the issue and the freezer door closes fully.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Daniel F from CALEDONIA, MN
- Parts Used:
- W11613295
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Freezer and refridgerator just stopped working.
The Condenser Fan Motor was already removed due to searching for the problem. The new fan motor looked different from the original but I felt very comfortable that Part Select had sent me the new part showing original part number changing numbers over the years. Simply placed the fan blades onto the new motor lined up 2 of the holes placed screws and tightened then plugged the wire ribbon into the Condensor Fan Motor, plugged in the Refridgerator and it worked beautifully.
The instruction video on the Part Select Web Site made it so incredibly easy to install. Installation took under 3 minutes!
The instruction video on the Part Select Web Site made it so incredibly easy to install. Installation took under 3 minutes!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joseph from MT PROSPECT, IL
- Parts Used:
- WPW10534153
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Clip cracked on back of kickplate and would not attach.
Pushed on new one as directed online.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- COLLEEN M. from NORTH TONOWANDA, NY
- Parts Used:
- WPW10326469
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Middle support for fruit and Veg drawer was broken and the Utility drawer front broke off.
Easy- took off fruit and veg drawers out. Added support under the glass in middle. Put drawers back. For Utility door just replaced.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Katherine from FOREST, VA
- Parts Used:
- WPW10326469
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
The center rail that the 2 crisper drawers ride on broke
I did exactly what the email I got said to do: remove the 2 crisper drawers, remove the glass directly above the crisper drawers, drop in the center rail. It worked just GREAT! Thanks a bunch!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jacqueline from LEXINGTON PK, MD
- Parts Used:
- WPW10662129
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Pliers
No cold
Like you video
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Adam from GLOVERSVILLE, NY
- Parts Used:
- WPW10662129
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Plugged it in.
Not so good that was not the problem. Fan is not seized and all the lights work and display is not on but lights up as well. No start once plugged back in after 15 minutes of being unplugged. Nothing same no change.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from PHOENIX, AZ
- Parts Used:
- W11613295
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
The refrigerator was working for just 1 minute and breaks, I discovered that the fan was not working , I understood that there wsa something wrong with the condenser fan motor. I just order a new one.
The installation video for condenser fan motor helped a lot to know how to disconnect the old fan motor and connect the new one. So easy just know how to remove and put back the fan gently, observe carefully where is the center and the connector position; 15 min after everything was done and the unit works well to date.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joseph from SPRING HILL, FL
- Parts Used:
- W10874836
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
broken hinge point
Removed cover ,two veggie bins, glass glass shelf, all took 10 min. It took longer to wipe clean every thing I installed the new end cap with 3 screws, I had to add one of my own as the factory only used 2 the rear one was not installed.it didn't matter.One thing that I didn't like was the parts came with no info, but my 40 years of working for air lines made the job easy for me.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- jesse from CLAYTON, NC
- Parts Used:
- W10874836
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
broken tab left side
Pretty simple, remove the pantry lid, drawers above glass pantry cover and then the glass cover and its metal supports.
Then the pantry tray from its metal slides.
Remove the slides then the broken end cap.
The slides and end caps are attached with 1/4 inch hex drive screws.
I did notice a small change in the new end caps which will improve the
strength of the problem tab. I do not expect the same problem again.
Then the pantry tray from its metal slides.
Remove the slides then the broken end cap.
The slides and end caps are attached with 1/4 inch hex drive screws.
I did notice a small change in the new end caps which will improve the
strength of the problem tab. I do not expect the same problem again.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mark from REDMOND, WA
- Parts Used:
- W10874836
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Socket set
Broken Pantry Lid Pin
Watched the excellent video on Parts Select. Followed the disassembly instructions from the video and replaced it just like that. Very quick and easy because of the video.
The only reason why it took me so long to complete the repair was the fact I had to clean a spill I had from I don't know how long ago.
Saved me a ton of money doing it myself!
The only reason why it took me so long to complete the repair was the fact I had to clean a spill I had from I don't know how long ago.
Saved me a ton of money doing it myself!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- ralph from hemet, CA
- Parts Used:
- W10874836
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
broken lid holder on left hand pantry door
removed crispersn glass under crispers. took out pantry drawer. removed three hex head screws , and removed pantry door holder.
replaced with ordered part and put everything back together. works great. also gave me a chance to really clean under the crispers.
replaced with ordered part and put everything back together. works great. also gave me a chance to really clean under the crispers.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sal from Guilford, CT
- Parts Used:
- W10874836
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
Pivot for Pantry door on right hand end cap was broken
Removed the Pantry drawer, glass top and plastic supports.
Removed the Right Hand end cap by removing the three holding screws with a nut driver.
Removed the slid out metal rail from the end cap along with the slide mechanism for temperature control.
Replaced all of the parts in reverse order.
Removed the Right Hand end cap by removing the three holding screws with a nut driver.
Removed the slid out metal rail from the end cap along with the slide mechanism for temperature control.
Replaced all of the parts in reverse order.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ken from LK HAVASU CTY, AZ
- Parts Used:
- WPW10235370
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
The glide for the panty door broke and a new one was ordered.
The glide was very easy to put on; however it is easiest to put in the front screw first, due to the thickness of the glide. Pretty easy!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- roy from ATMORE, AL
- Parts Used:
- W10874836
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Socket set
The end cap that has the hinge pin for the pantry door was broken off
I removed the pantry door, the pantry drawer and the glass shelf above the pantry drawer. I removed 2 screws/bolts from the left side end cap and removed it. I simply installed the new pantry end cap with the 2 screws/bolts and tightened them snuggly. I then replaced the pantry drawer ...installed the glass shelf...reinstalled the pantry door and that was it...the wife took over after that
Was this instruction helpful to you?
Thank you for voting!