25331628100 Kenmore Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Door shelf retainer end caps broke for the middle and lower door shelves
Snapped the broken end caps off the rail; snapped on the new ones; snapped the assembled rail/end caps into the door. It was a snap.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- wilson from indialantic, FL
- Parts Used:
- 5304464438
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Wrench (Adjustable)
compressor not running
thanks to all of the people who had the same problems I was able to make a quick fix on my fridge. I pulled the back cover off and found the compressor not kicking on so I replaced the start cap. and im back in bussiness.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kathleen from Hugo, MN
- Parts Used:
- 240311502
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Shelf bracket inside of freezer door broke/cracked off
Thrilled to realize I didn't have to replace the entire bracket ($$) but was able to buy this inexpensive end cap, remove the cracked one and snap this new one in place. Inexpensive, fast and easy as pie. No tools needed. Good as new.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Donna from North Charleston, SC
- Parts Used:
- 240311501
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Tenants "lost" all the retainer bars and end caps
I was thrilled to find out I could order the parts so inexpensively and easily from Part Select! The shipping was FAST! No tools required, just snapped in and done!
Was this instruction helpful to you?
Thank you for voting!
Was missing a freezer shelf
Parts came in the mail, and the bar was a little too long, so I cut it with tin snips and it went right in. Easiest job I've ever done.
Was this instruction helpful to you?
Thank you for voting!
Door shelf retainer parts missing
Ordered the parts, put them together and placed them on the door. Five minutes and I was done.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Judith from Gambier, OH
- Parts Used:
- 241559801
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
light socket burned out
snapped the wires from frig onto the proper prong and viola,it works. The proper prong is identified by the size because there are two prongs with the wires and two connecting prongs in the socket. I talked to a very helpful representative and she gave me the number for Frigidaire, when I was confused by the placement of the wire. Wish I had remembered her name to share with you. As it turned out I didn't need to call Frigidaire.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mary Ann from Hawley, PA
- Parts Used:
- 5304414035
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
bottle fell and clipped edge of range
Touch up paint was easy to apply. I gave it a few coats and you cannot tell where to chip was. I wish you had a standard mail delivery option. I paid twice the price of the paint for fed ex delivery. I didn, t need the paint next day but it did get here before the estimated deliverydatee.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- ronald from deering, NH
- Parts Used:
- 5304464438
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
freezer would not freeze longer than one day. after ten years without problem
pulled out freezer, went to floor,reached in next to compressor pulled off clip just like on the video.Pulled off old capacitator took off wire leads.Installed new one. Freezer runs great.Loaded it up with beef pork and venison. No problems.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Maureen from Anchorage, AK
- Parts Used:
- 240311502
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Original end cap had broken
Replaced end cap. Very easy fix. Only took a couple of minutes.
Was this instruction helpful to you?
Thank you for voting!
The freezer door shelf retainer had snapped and broke at the plastic ends.
I ordered the plastic end pieces and the metal strap they connect to as outlined by the PartSelect website.... The metal strap they sent was too long and I couldn't cut it to fit. I did realize, however that there was nothing wrong with that part so I attached the end pieces to the old middle piece and it worked out just fine. I now have an extra part that I didn't need after all though.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- William from Miami, FL
- Parts Used:
- 5303918202
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
Freezer cold and frig warm
Replaced evap motor. Everything is strong and running like a champ. Partselect video examples were very helpful. Would order parts again on next problem. Thanks
Was this instruction helpful to you?
Thank you for voting!
Replacing door shelf retaining bars on a frog
There is a local appliance parts store that charges high prices but one can return parts. I ordered 3 things and they got ONE correct. I thought I can do better than this. I went on line and found PART SELECT which provides very good schematics so I could order my own parts with confidence. I got a lll the correct parts, quicker and at a very good price. II have a lot of apartments so this is IMPORTANT to me. PARTSELECT is now my GO To for appliance repairs
Was this instruction helpful to you?
Thank you for voting!