JBSS48E22L00 Jenn-Air Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- TJ from Jasper, GA
- Parts Used:
- W11629974
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Ice maker wouldn't fill with water to make ice.
Removed the screws and disconnected the part from the base. Attached the new part to the base and screwed back in. No big deal!!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Branson, MO
- Parts Used:
- W11291138
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
switch was broken
I popped the switched out depressing the underside of the switch so that it could be removed.
I ordered the part.
Paid for normal shipping.
Received an order confirmation.
Received a shipping notification.
Received the part the next morning.
Open the part and attached the wires.
Pushed the switch into the hole and the process was done in less than 24 hours. I couldn't have been more pleased. The actual installation took less than 30 seconds.
I ordered the part.
Paid for normal shipping.
Received an order confirmation.
Received a shipping notification.
Received the part the next morning.
Open the part and attached the wires.
Pushed the switch into the hole and the process was done in less than 24 hours. I couldn't have been more pleased. The actual installation took less than 30 seconds.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Stephen from Chicago, IL
- Parts Used:
- W11629974
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
No ice was being made
After reading other repair stories online, i ordered the parts, followed the included instructions to replace the boards and the next day i had a full bin of ice. This is the second refrigerator i fixed with parts from partsselect.com. They are AWESOME!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gail from Kingston, MA
- Parts Used:
- W11291138
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
tab was broken
Recently unemployed, we knew a repairman was out of the question. We opted to glue the broken tab,but I knew that would just be living a substandard rerpair so looked on line. Found our replacement part very easily and much to our surprise we had the part the next day, yes, the next day!! Looking at the new part gave us the confidence to pop out the old one without causing damage to our unit. It was a no brainer , pop out and plug in w/in 30 seconds. Small appliance repairmen are a minumum of 75.00 service fee plus parts. Our repair less than 20.00 less than 24 hrs. How good is that?
Gail Costa
Gail Costa
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mark from Georgetown, TX
- Parts Used:
- W11629974
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Ice Maker would not stop making ice.
Unplugged electrical cord for refrigerator, Removed the 3-screws for the bad Emitter, unplugged the wiring harness, plugged the wiring harness into the new Emitter put into position replaced screws, Removed screws for bad Receiver unplugged wiring harness, plugged in new receiver put into position replaced screws plugged refrigerator electrical cord back in. Working ok.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Harry from Lafayette, IN
- Parts Used:
- W11629974
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Ice maker would not release ice cubes
My Ice maker would not release ice cubes, it thought the ice bin was full. So I got on You Tube and looked up how to videos. Partselect videos were the best that I found and the prices were low also. The whole repair took about 15 minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- William from Syracuse, NY
- Parts Used:
- W11629974
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
No Ice, no Transmitter light
Unplugged appliance, removed both boards, 3 Phillips head screws in each, reinstalled new ones. Shortly after ice was coming.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Charles from Chino Hills, CA
- Parts Used:
- W11629974
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
quit making ice
I watched the video on your web site and did exactly what the video showed. I could not a get an appliance parts shop to tell me how to test the sensor, so I went on your site. It not only showed me how to change the sensor,it showed me how to test the sensor in my refrigerator. I have changed ice makers before, but never the sensor. Your site saved me $75 dollar service call and saved me $35 dollars on the part. Thank you very much!!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- WAYNE from KENNERDELL, PA
- Parts Used:
- W11291138
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
light switch was accidently hit and broke.
plugged the two wires in and snapped the switch into it's socket.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Matthew from Buffalo, NY
- Parts Used:
- W11396033
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
Broke plastic tab on auto light switch
Used screw driver to pop out old switch. Used pliers to hold wire connection from fall back into slot on fridge. Inserted new swith into plug and pressed new switch back in place.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Angel from Miami, FL
- Parts Used:
- W11629974
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Wrench set
Icemaker wouldn't drop ice cubes into bin
I first removed the icemaker service door by separating the door pins from the hinge sockets. Next, I removed a 1/4" screw from under the right side of the icemaker that retains the icemaker and a “U” plastic clamp. This clamp straps to the icemaker from behind. Then, after partially sliding the old icemaker out, I struggled somewhat decoupling the wire connector because it was frozen. After disconnecting the wire harness, I then removed the defective icemaker.
The next step was, with the same 1/4" ratchet wrench, I removed the 3 screws from the bracket on the underside of the icemaker. I then proceeded to attach the same bracket to the new icemaker.
Next, I connected the electrical connector at the right side. I struggled a little bit sliding the new icemaker in because the water cup assembly on the new part was taller than the old one and thus bumped into the water delivery tube.
You then reverse the procedure for installation.
Finally, before operating the icemaker I turn the icemaker switch on and turn off the power to the refrigerator for about one minute before turning it back on, while the freezer door was closed. Within 5 minutes, the icemaker was working properly and within 24 hours the ice bin had been filled.
Good Luck!
The next step was, with the same 1/4" ratchet wrench, I removed the 3 screws from the bracket on the underside of the icemaker. I then proceeded to attach the same bracket to the new icemaker.
Next, I connected the electrical connector at the right side. I struggled a little bit sliding the new icemaker in because the water cup assembly on the new part was taller than the old one and thus bumped into the water delivery tube.
You then reverse the procedure for installation.
Finally, before operating the icemaker I turn the icemaker switch on and turn off the power to the refrigerator for about one minute before turning it back on, while the freezer door was closed. Within 5 minutes, the icemaker was working properly and within 24 hours the ice bin had been filled.
Good Luck!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from Hiawassee, GA
- Parts Used:
- W11629974
- Difficulty Level:
- Very Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Screw drivers
Ice Maker not filling water
Replaced sensors but still not making ice. Followed the Brown wire from the Water fill selenoid to the Ice Maker Module. Take the three screws off the Icemaker Gearbox and there was a severely Crusty Connection. It cleaned fairly well and Presto.....ICE!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Howard from Boynton Beach, FL
- Parts Used:
- 350930
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver
Both outside door handles turned very beige
Everything worked perfectly---thanks to the suggestion of your call center agent. She suggested that since the replacement door handles were no longer available, I should consider repainting them--it worked like a charm. Please tell her she was a life saver. We rent that house in Fl and my returning tenants had complained about the discoloring refer handles. Thank you
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dave from Lewisville, TX
- Parts Used:
- W11629974
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
ice maker would not sense to make ice
replaced emitter and receiver
Was this instruction helpful to you?
Thank you for voting!