TPX24BIDABB General Electric Refrigerator - Instructions

The video on the site was very helpful. The repair was really easy. It was exactly the way the video showed how to do it. I would definitely use this site again to find parts, figure out the "how-to", and use for skematics of appliances. Thanks.

REplaced old icemaker with a new one. Install simple, However that was not the problem. I then replaced the water valve. Still no ice. I check the electric connection was OK. THe problem was the elbow fitting on the top back of the refrigerater leading to the icemaker was blocked with ice.Cleared it and turned water faucet up all the way. Ice maker worked.

Watched video on website then removed old ice maker. New one went in without any problems. Working great. I am a 60 year old woman and had never done anything like this but so easy. Husband scared now, doesn't know what project I will take on next.

The instruction video was great, mine was easy than even the video showed it to be. I changed it out in less than 15 minutes and it works great. The niocve things I didn't have to wait for a repairman or my husband to fix the problem.

Placed the glass shelf in the new shelf frame and the frame in the refrigerator.

I was unable to positively identify the replacement shelf frame on the GE web site. Part Select's exploded view made it a piece of cake!

install icemaker water was allways delivered to previous unit water is not being delivered to icemaker still having difficulty

I watched the video and then read the instructions. Emptied and cleaned freezer compartment. Removed old unit and removed part of old unit to be used in new installation. I then installed the new unit and turned the water back on. I let the unit produce over night and through the first batch of ice away. Because of the various regrigerators this ice maker was used I had a little confusion recognizing our model, but worked through this problem useing some common sense. All around I'm very satisfied with the results.

I took off the front cover of the icemaker assembly and found that the gears were not meshing properly and therefore slipping. I removed the front panel and found that the white plastic cam unit under the large gear wheel had disengaged from the hole in the front plate which is why the gears were slipping. I refitted the cam and wheel and it worked fine but stopped again for the same reason the next day. As the plate appeared to be buckled somehow (not user repairable) and, as the unit was leaking and pooling water (which froze) in the collection unit, I decided to change the whole icemaker.

Ordered about 1300 on a Thursday, it arrived the next day at noon and was fitted straight away. As others have mentioned, the extension cable required to fit into my old fridge made it quite cumbersome however with a bit of juggling and persuasion, I got it to fit into the cut out corner of the ice container so it is completely out of the way. Job done in about 35 minutes, making ice in an hour.

Installing the actual ice maker was quite easy. What takes most of the time is preparing the freezer for the install. Need to remove all shelving, (and the door) to gain access to the unit. The ice maker is simple to install once access is achieved. Putting everything back together takes some time.

I had to defrost the freezer to free the icemaker. After that the installation was plug and play with two small exceptions: 1) I had to file down the width of the left hand tine of the old stripper so that it would fit the new icemaker, and 2) the motor housing of the new icemaker was slightly wider than the old one. It fit, but just barely. But I'm back in the ice again, no dripping water, all is good.

Remove items from Freezer, remove panel and defrost condensor coils (most time consuming part of the job). Defrost Heater is held in with two screws and two electrical connectors (remove by hand or with pliers). It's worth replacing the Defrost theromostat and Defrost heater at the same time. Only cost $60 for the two parts and will ensure you have the fix. Use the "outdoor" wire nuts when splicing in the Defrost thermostat, that will ensure you don't have any issues with moisture at the splice. When defrosting the condensor coils, soak up water as the catch tray won't hold the volume of water that will melt off the coils.

I had a frig several years ago do the same thing -- freezer coils icing up and temperature warm. I had watched the repairman come in and take the back off the freezer and install some part, I knew not what. So I got on YouTube and four this website with instructions and directions of how the put the part in and which part it was. I am good at trouble shooting and was very comfortable after watching the video of what to order. I ordered the part. The instructions were clear. After the coils had thawed, it took less than 30 minutes to install the new part. I installed a Defrost Heater. My refrigerator has worked ever since. I am not a mechanic nor a fixer upper. I am a 60 year old female school teacher.

Went well. Changed the Ice Maker and then the Water Valve. All good and it is making ice.

I replaced the Defrost Timer & Defrost Thermostat previously only to find that the freezer was still freezing up. It was obvious that the Defrost heater was bad and I ordered it. I had ignored Parts Select reccommendations on my first order otherwise it would have been less than 30 minutes to complete all of the repairs. It took longer to defrost the freezer coils than the actual repairs took. I followed the published installation from Parts Select and now my 10 year old side by side is working like a new appliance. Thanks Parts Select for the fast shipping and accurate replacement instructions. Jim from Virginia, you get 10 stars from me!

First Unplug! then Removed shelves light bulb in freezer removed back panel and themostat right on top pulled off cut wires and butted up to new wires then puched clip back on and replaced everything. Works like a charm now. just as though it was a new one.