ZIR361NPRCII General Electric Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Mark from Pawleys Island, SC
- Parts Used:
- WR57X33326
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Wrench set
easy job
Only one problem. After installation I had air pocket in the line, no water. Took out filter and installed plug that came with the unit. System worked so I then put the filter back in.Works Great!!! Saved big money
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Miriam from Placerville, CA
- Parts Used:
- WR57X33326
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Wrench set
Water continuously leaking from water dispencer
I am so amazed at how easy the problem was fixed! I researched the issue, ordered the part, and after watching the youtube video of the part replacement, I was able to fix our water dispencer/ice maker! Saved us purchasing a new refrigerator...Thank you so much!!! Now I am going to fix the dryer.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- raymond from grove city, OH
- Parts Used:
- WR57X33326
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
leaking double water valve
Part came very fast using standard delivery. easy to repair.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- douglas from englewood, CO
- Parts Used:
- WR57X33326
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Pliers
water leak behind refrigerator
Identified very small stream of water shooting out of center of blue plastic housing where the icemaker/water dispenser hose connects to external water source. A flashlight up close made it possible to see the water stream, after removing the steel cover from the lower back of the refrigerator. You remove the black and white hoses by PRESSING in on the white plastic rings. I unplugged power before removing/reconnecting the 2 electrical connections with needle nose pliers. Replacing this thing stopped the leak, but I also had to change the circuit board to solve the icemaker water dispenser issues. I also replaced the vampire tap on the house supply line with a shut off valve so I could do this repair without shutting off the house water supply. I did have to shut it down to install the valve, but now I can shut off the refrigerator water supply when needed to replace the filter.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Patricia from Dalton, GA
- Parts Used:
- WR57X33326
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
No water in door Leak out of valve
took off plate pull out old valve plug in new valve replace plate
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Tracy from Winterset, IA
- Parts Used:
- WR57X33326
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Wrench (Adjustable)
Water leaking from valve.
1.Unplug and turn off water supply to refrigerator. 2.Remove several screws from back panel and remove panel 3. Remove water supply line from valve. 4. Remove screw holding valve on using 1/4" nut driver or socket. 5.Remove the 2 electrical plugs and 2 water lines from valve. 6.reinstall in reverse order. This is a 5 minute job at best. Good Luck! I had my fridge in storage for several years and when it froze it cracked the storage tank PS783769 I replaced it first and found valve was leaking after tank was replaced.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from Santa Maria, CA
- Parts Used:
- WR57X33326
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Water hose for water in door would not stay installed
Turned the water off to the refrigerator. Pulled the refrigerator away from the wall opening. Removed the back lower panel. Removed the lines to the water valve. Removed the electrical connections. Installed the water lines on the new valve and verified they would not pull out of the push in connections. Installed the electrical connections. Turned the water on and checked for leaks and proper operation. Reinstalled the back panel and positioned the refrigerator in it's proper position.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Herb from Leawood, KS
- Parts Used:
- WR57X33326
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Wrench (Adjustable)
Leaky electro valve
After watching the video it took me about two minutes to change out the valve!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Homero from Farmington, NM
- Parts Used:
- WR57X33326
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
shut off double water valve not working
Watch the video
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Samuel from Dunedin, FL
- Parts Used:
- WR57X33326
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Wrench set
Water Valve Broken
As per Youtube video
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Diane from flagler beach, FL
- Parts Used:
- WR57X33326
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Water button on door failed to work
Removed back panel and checked water lines which were empty. Followed booklet instructions for problem solving first. Water Valve appeared to be hot. Ordered new part which came in record time. Removed water lines and connected new part which was fairly easy. Replaced filter and still no water coming up but only going down to new part. Opened freezer door thinking reservoir frozen and left door open for 20 minutes which caused reservoir to defrost itself. Button now works.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Mckinney, TX
- Parts Used:
- WR57X33326
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Socket set, Wrench (Adjustable)
No water coming out.
Turns out replacing the part was not needed. Still did not work. Opened freezer and hit inside of door with hairdryer to thaw out frozen water line. Wish I would have done that first. Water works fine now.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- William from Medfield, MA
- Parts Used:
- WR57X33326
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Socket set
Water dispenser not working
Unplug refrigerator. Take off back plate with socket driver. Take screws off inlet valve. Then with bowl underneath to catch water, pull off hoses from compression fit. Then reverse to put back together. (Cleaned and dusted the back/sides of fridge too!)
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mike from Brooksville, FL
- Parts Used:
- WR57X33326
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Wrench (Adjustable)
No water from dispenser
Just like installation video said. One error I did not read first note that check to see if line was frozen, which it was. Nothing wrong with valve, but changed it anyways. Works great now. Thank for all the help. You all are great.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Samuel H from Greensburg, PA
- Parts Used:
- WR57X33326
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers
would not dispense water. made Ice
I removed the lower panel on the back of the Refridgerator. Then looking to the left ,Identified the Valve. I then removed the retaining screw from the valve allowing me to remove the water tubing and electrical connections. Installation was reverse proceedures. It is very easy !
Was this instruction helpful to you?
Thank you for voting!