ZIR301NBRAII General Electric Refrigerator - Instructions

Since the mechanisms were in the freezer icemaker area, we deduced it was the fan motor. Ordered that from your store and it was delivered to our door in two days. Great service.

The part was replaced and our refrigerator has been quiet for the first time since we moved in almost four years ago and the refrigerator was new.

Removed back lower panel, removed valve, ordered part on internet, cleaned motor and back of fridge. Most time spent was waiting for delivery of ordered part. Part received and installed in 15 minutes after reviewing instructional video included in my email verifying my order, fridge pushed back into place, waited for ice maker to refill.....DONE. So easy. Thanks guys. Job well done.

I went on Google to get GE Tech Manual. But really, undid screws for back plate; Dismounted (1 screw) Water Solenoid assembly; disconnected 3 water hoses into solenoid; unplug two power connectors. Then reversed the process with new Water Solenoid...works great!

Easy repair. Diagnosis was tricky - this website and popular mechanics article helped me to narrow down the problem to the solenoid water valve.
Unscrewed the left side of the back panel and unscrewed old water valve from its bracket. The steel inlet hose was easy to disconnect, as were the two electrical socket connectors. The two outlet water hoses to the refrigerator were a little trickier. You need to cut them with a blade, and insert them into the new valve, which has teeth to hold them in place. Once I figured that out, the rest was easy. I remounted the bracket, and then tested the water flow successfully. Great website, thanks for the help!

I turned the water off at wall. Then I removed 6 nuts removing the back cover. Removed one nut to remove the outlet water valve. Disconnected two bottom hoses and put them on the new unit. Removed top hose and installed on new unit.
When I removed the top hose water did spill out.
I had to rush to connect it to the new unit .

Removed the back bottom panel and removed the one screw holding the water valve on. Removed water connections and replaced with new valve. Ice was made in the first 10 min. However, drinking water was not available for 4 hours to the dispenser.

turn off fridge. disconnect water. take off back panal. disconnect hoses from blue and red part of hose and unscrew old valve. put new valve and reassemble. in case of leak DO CUT HOSE TO ATTEMPT BETTER FIT. learned that one the hard way. those hoses come with the filter holder and are sold as a part. u live, u learn. all better now.

The process would have been fairly intuitive, and the part is designed in such a way that it is impossible to hook anything up to the wrong connecting point. PartSelect's on-line video of the repair was clear and easy to follow -- the perfect primer to review before I started the job. The first part I received was defective, and although it functioned it leaked water onto the floor. This gave me the opportunity to engage PartSelect's unparalleled customer service department for friendly and incredibly prompt correction. I look forward to my next appliance failure just for the pleasure of doing business with this exceptional firm.

Instructions are excellent - no modifications. The problem was with determining what was causing the leak. GE, in telephone conversations, kept telling us to run several gallons of water through the system to remedy the problem, and suggesting we change the water filter (MWF). We discovered the remedy by looking through your listing of replacement water parts, till we found the commentary dealing with our problem. This is the second problem with the refrigerator solved by searching your catalogue and reviewing your demos. I'm afraid you have a customer for life (at least for the life of our GE appliances).

I ordered a new solenoid. i took the old one out and put the new one in-- done-- and it works!

Videos for installing the part is really very helpfull.It takes replacing arround less than 30 min. Thanks....

Very easy not difficult

I ordered the part, fast shipping, watched the video, great video, made the repair, customer happy. What a great experience for all of us. Bill

I just followed the instructions from the video attached to this order. Thanks to Parts Select for sending me the part on time and attaching a video showing installation.

The problem began when freezer thawed and could not keep food frozen. Initially, I thought the issue was the defrost heater (because I had seen similar symptoms previously and resolved the issue with a new defrost heater)and I replaced that part with a spare that I had puchased previously. The issue was still unresolved and I noticed the evaporator fan was not running in the freezer because it would not turn on when I closed the door. I checked to make sure I could hear the compressor working (and it was)and concluded that the evaporator fan motor was not running. I ordered the part and found a YouTube DIY video on how to replace it. While I was at work, my fiancee took it upon herself to watch the installation video and install the new evaporator fan motor and all is well.