GSS22IBTC General Electric Refrigerator - Instructions

easy, we just placed the new vegetable drawer in.

I emptied all items from the above drawer shelf, removed the shelf and drawer, cleaned the area from previous spills, use a screw driver to remove the 2 screws holding the old slider in and replaced the slider. All parts fitted and it took around or less than 15 minutes.

I found the frig not cooling as good as it used to and did some research on the net and found some common failures. I started with the easiest test and ohmed out the defrost heater and also noticed it had blackened spots on both ends of element. The ohm reading confirmed it to be open. Replacement was easy for a "diesel" mechanic so basically anybody that can follow directions should be able to replace thiers as well.

I removed food from shelf over crisper drawer, then removed shelf and crisper drawer, removed two phillips head screws in right side rail and replaced rail.

Easy as 1-2-3

The drawer slide broke and I just removed the 2 screws that were still in the side of the refrigerator. I then screwed the new drawer slide in the same holes and it was done!! Simple, simple....even for me, the housewife.... ; )

Took the drawer out, unscrewed 2 screws, replaced the part, put the drawer back in.

After reading about what others had done on PartSelect, I decided to order the defrost heater and bracket assembly. When the parts arrived (very prompt) I removed the back panel of the freezer. Ice was covering the coils, so I took a hair dryer and melted the ice. Then I removed the defrost heater and replaced it with the new one. Very easy; only a couple of screws on the back wall to remove and one on the heater itself. Anyone can do it. I had called a repair service, and they wanted $75 just for the service call. I probably saved at least $100 by doing the job myself.

I removed the shelves & drawers, then unscrewed the side rails (2 screws in each one). After screwing in the new rails (I had saved the screws from the old parts -the new rails did not come with screws), I only had to place the drawer & shelf back in the fridge and the job was done. It took maybe 5 minutes to replace.
I ordered the parts late morning on day one, day two the UPS man was at my door while I was eating breakfast! Less than 24 hrs. from order to delivery!

1st I unscrewed the side rails after I removed the drawer. I saved the screws and both rails until I received the new ones.There were 2 screws in each side. 2nd I looked online at the parts select web page. The exploded diagrams were extreemly helpful. Like most people my appliance book does not have this feature. I ordered the 2 rails for the drawer on Sunday morning and the parts were here by Wednesday afternoon..very good service in my opinion. I then proceeded to replace the two side rails with the screws that I saved from dismantling them. I then put the drawer back into the refrigerator and it worked perfectly. This repair was easy and it saved me a $60.00+ dollar service call and a longer wait period to get the repair done! I will continue to use part select.com for all my appliance repair work. Thanks

removed two screws removed bad part installed new part.

First I removed the two screws that held the slide in place. I then pulled the slide out and lined up new slide and reinstalled the screws.

When the part first arrived I thought that I had ordered the wrong one. It was a dual element heater while the one in the freezer was a single. After reading the instructions it gave specific info on how to replace a single element with the dual. It was VERY easy to replace. i had manually defrosted the coils a couple of days before but they were already covered in frost. I know that I should have manually defrosted them again but I installed the new element anyway and it started working instantly (must have caught it on the 'on' cycle or when I repowered the fridge it started the 'on' cycle). The coils were defrosted within a few minutes. Amazing. Very easy to follow instructions.

I removed the two screws on each rail and replaced the broke rails with the new ones. I can't beleve I put it off for a year. It took less then 15 min. encluding the time it took to order the parts.

First I removed the freezer compartment backplate by unscrewing three screws. Then I unscrewed the 2 screws holding the heater element in place. While holding it in one hand I pulled the wires off, one on each end of the element. Then replaced it with new part and put it all back together. Piece of cake.

First take all your junk off the shelf (with the broken rail of course), take the glass shelf off. Remove screws (phillips). Throw away old rail. Replace new rail, tighten screws. Replace shelf, replace junk. You're done.