Models > WRS22PRBW0 > Instructions

WRS22PRBW0 Frigidaire Refrigerator - Instructions

Jump to:

All Instructions for the WRS22PRBW0
106 - 120 of 261
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Denise from Landover, MD
Parts Used:
316538904
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
light bilb went out
replaced it
2 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
steve from Kirkland, WA
Parts Used:
215846602
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
freezer worked frig was warm. Ice maker is still not working
Removed two screws to get to defrost time pull panel down remove two screws holding time and reinstall
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Edward from Piscataway, NJ
Parts Used:
215267701
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
door end cap broken,
Put the new ordered door end caps in place, everything worked fine.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Errol from Mayfield, KY
Parts Used:
5303289500
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
The drawer had been damaged probably from not closing the drawer and refrigerator door was shut.
We removed the front of the drawer from the old drawer and reinstalled on replacement drawer. It only took about 5 min. to complete. Shipping was Prompt. The person that helped to establish the Part no. was very helpful.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Scott from Alexandria, VA
Parts Used:
5303289501
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The Bulldog grabbed the Meat and Cheese!
Lower Door in Fridge Broke and all the Meats and Cheeses came tumbling out...Bulldog grabbed a bunch of it and gobbled it down ...so I looked up the part on Wednesday and ordered it, received it on Friday (really fast without paying extra)...took out meat and cheese that was left, presssed old front piece onto new drawer and slid it into place...meat and cheese now safe from bulldog again!!! Thanks PartSelect.com!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Joachim from Marengo, AL
Parts Used:
5303289501
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
refr. shelf had been damaged and glueing would not work permanently
Just snap the ordered part to the undamaged front part together.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from Wesley Chapel, FL
Parts Used:
5303289500
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
broken drawer
I removed old drawer, removed face plate, installed faceplate on new drawer. Test OK.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from Anna, IL
Parts Used:
5303289501
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
broken slide rail on lower storage drawer
Pulled out the drawer and replaced it with the new one.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
LUIS from CENTENNIAL, CO
Parts Used:
215846602
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Freezer built ice, fridge not cold enough and running constantly.
Removed front low grill, removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the wires. Reversed process to install new timer.
1 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
M from Louisville, KY
Parts Used:
5303289500
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Broken track on upper storage drawer
No tools required! Easy as falling off a log! Drawer face snaps off and reinstalls on new drawer body; slide it in track and you're good to go.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
NATHANIEL from PEARLAND, TX
Parts Used:
5303289500
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Top Edges Broke
Use small srew driver to take door off and put back on just like the video you supplied on line.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
LK from LAWRENCE, KS
Parts Used:
5303289501
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
broken rail inserts that hold the drawer up and in place
Moved glass front from broken drawer and placed on new drawer
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from Tampa, FL
Parts Used:
5303289501, 5303289500
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Drawers had broken due to age
Founds parts I needed here. Customer service was very helpful. Parts arrived in very short time frame 1-4 days.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Lee Ann from Houston, TX
Parts Used:
5303289500
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
broken drawer
removed the drawer, pried off the glass front, slid the glass front into the new drawer, and returned the drawer to its place in the referigerator.

The schematic drawings on the PartSelect website were really helpful.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Thomas from Williamstown, NJ
Parts Used:
5303289501
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The Drawer was broken on the guide edge.
Got the new one and took the face plate off the old and sliped it right on to the new one. I noticed that the guide edges on the new Drawer are made better. That is added bennie.

Thank you so much
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the WRS22PRBW0
106 - 120 of 261