XRSS264BB (PXRS264BB0) Amana Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Jennie from Clarksville, TN
- Parts Used:
- WP67005959
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Ice bucket was cracked due to cube getting stuck between auger and bucket
Repair was simple. Only problem was the screw holes weren't completely drilled through. This caused a little damage to the new ice bucket while driving the screws. Damage is minimal and ice bucket works.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Rick from Tooele, UT
- Parts Used:
- WP67001503
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken guide on tray bin
Not much to say. To much weight (maybe?) in drawer and overzealous kids. I have replaced it once before and all I had to do was remove the drawer, put in the new one. Fit great and was back in business. I do have to say that when I've ordered parts here before, I have been real happy with the quick service. A+ for getting it to me quick!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- George P from McKinney, TX
- Parts Used:
- WP12740302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Ice maker stopped dispensing ice.
Ordered the correct replacement part (Icemaker Auger and Crusher Blade Assembly) as found here at PartSelect.com. Part was delivered within two days. Removed two screws to remove the old assembly; inserted new assembly, replaced the screws and problem fixed. Couldn't be easier.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sara from Walsenburg, CO
- Parts Used:
- WP12740302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Auger quit working - wouldn't dispense ice
Removed old auger unit by removing two screws - installed new auger unit by replacing the two screws. Easy schmeasy!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dennis from Mammoth Lakes, CA
- Parts Used:
- WP67005959
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Rim of ice bucket broke off and was cracked
1.Lift out the ice bucket. 2.Remove two screws at bottom. 3. Remove front (made up from parts 20 and 21 in diagram by lifting the plastic flanges at the bottom and sliding it off upwards. Fingers were adequate to lift the flanges. 4. Remove the mechanism. It comes right out. 5. Slide the mechanism into the new bucket. 6. Put the front onto the new bucket by sliding down and lifting the flanges over the ridge at the bottom of the bucket. 7. Put the two screws in at the bottom. 8. Slide the bucket back into the freezer. This was the easiest repair I have ever done.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Anthony from Olathe, KS
- Parts Used:
- W10142650, WP12740302, 67006425
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Socket set
Ice maker no longer vending ice
Very easy repair just follow the instructions provided here
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dave from Geneseo, IL
- Parts Used:
- 12015002, WP10941102
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The shefl support in the freezer had broken
Ordered parts from Parts Select. They were here like overnight!! Unreal. Supports just slipped in. Absolutely easy. This was my first order ever from Part Select but have a feeling it won't be my last. Parts were here so fast I did not know what had arrived until I opened the package as I had not expected them so quickly! very satisfied.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bruce J. from Findlay, OH
- Parts Used:
- WP67005959, WPD7749401
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
ice would not come out end cap broke
take the front off the ice maker. take the bar out. then replace the helix end cap. then put the bar back and the front.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ann M from Ligonier, PA
- Parts Used:
- R0181181
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Socket set
The door droped down and made a knocking sound when the door opened
My husband took the door off and replaced the door closure cam kit with no problem the door opens without a sound.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Linda from Biscayne Park, FL
- Parts Used:
- WP12603701
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Moved into a new apartment and this part was missing from the refrigerator so the bottom crisper was not functional.
Was a very tight fitting part and it had to be gently tapped into place.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Elaine from San Antonio, TX
- Parts Used:
- WP67007098, WP12665101, WP12562701
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Ice Chute Door broke off causing frost to build up around the chute
Repair was super easy. Assembled each piece as shown on sheet. Removed the drip tray and 2 hex nuts. Either get someone to hold the panel or, what I did was rest it on a step ladder. Inside you have to remove 3 more hex nuts--pull out the plastic housing and and snap the chute door in place lining up the three notches. Put everything back together and no more frost (or flies or gnats either, for that matter!).
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Craig from Oakland, CA
- Parts Used:
- WP12740302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Icemaker Auger was not despensing Ice or Crushed Ice without dislodging
Opened box removed Icemaker Auger and Crusher Blade Assembly (assembled). Removed Ice bucket from refrigerator, took off face cover, removed two screws at the bottom of auger assembly and removed the auger from the bucket and inserted the new one replaced the two screws. Installed the Ice bucket. Worked like a charm.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Louann from Westerville, OH
- Parts Used:
- WP67001503
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken Drawer
Ordered part...removed old drawer...put n new drarwe
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gail from Wesley Chapel, FL
- Parts Used:
- 67003895
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
part was missing when we bought the home
Just placed the item in the proper holding slots. I was very pleased with the service from the company and the item came quickly, so that I could start using extra freezer space.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mary from Hartsburg, MO
- Parts Used:
- WP12740302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
ice agitator was stuck and wouldn't dispense ice
I've been messing around with the old part for literally years. Every now and then the metal agitator rod would spin out of the plastic cup that joins it to the freezer. I'd have to disassemble it and try to get it back into alignment. This time nothing worked, so I ordered a new assembly. It arrived even more promptly than PartSelect predicted and it installed in five minutes. I couldn't be happier!
Was this instruction helpful to you?
Thank you for voting!