XRSS204BB (PXRSS204BB0) Amana Refrigerator - Instructions

The worst part was unloading the door shelves. Removed upper hinge cover and hinge hex screws. This allows the door to be removed. Lay the door on side. Remove screw that holds cam in place. Replace
broken cam with new piece. Put the door back on the hinge pin and replace upper hinge screws and cover.
Now reload all of the stuff.

Just put the dairy tray were I wanted it. Will do the same with the crisper drawer when it arrives.

I have never used the ice maker because I have a well and didn't want to usewell water to make ice. I usually make ice with bottled water.
I decided to try making ice with gravity fed water from a converted water fountain placed on a higher level than the refrigerator, locater in my garage next to the kitchen.
When I looked at the rear of the frig. I saw a copper pipe (on the bottom of the frig.) that lead to a valve, with a plastic tube that went to the freezer. I didn't think that the gravity fed water could go down to the bottom and return to the freezer at the top, so I cut the plastic tube, and fed the water directly to the ice maker.
I only put a small amount of water in my water source because I wasn't shure what would happen. The water filled the tray and the rest of the water went to the container that catches the ice.
I did get one tray of ice. I later found that the valve that the copper pipe went to, has a 7 minute timer that only allows a small amount of water to pass.
My next effort will be to connect to the copper pipe and see if it will allow the gravity fed water to rise to the ice maker. Wish me luck

Replaced the frame

plugged the two wires in and snapped the switch into it's socket.

I am completely satisfied with PartSelect Appliance Parts. I had a broken vegetable drawer in my Amana refrigerator and had delayed fixing it because I thought it would be difficult. Finally I got the model number from the door sticker and Googled it for where I could find the part. PartSelect came up and I was amazed at how easy it was to locate the correct replacement item and how easy it was to place the order. Then much to my amazement, the part arrived in 2 days and in perfect condition because it was shipped with all precautions against damage. I removed the broken drawer, pushed in the new drawer and voila! All good. I highly recommend PartSelect Appliances for their user friendly web site, their ease of ordering and their super fast shipping. Thank you!!

pulled the old one out and slid the new one in. Even I did this right. If I can do it anyone can do it. The only thing I worried about was if I ordered the wrong Crisper Pan.

I watched the online video and followed the directions. The only thing that was not obvious (and this is where the video saved several minutes)was how to remove the upper part from the door. This repair makes the door seals much more effective and should reduce the compressor run time. I have to compliment you on your prices and speed in getting the parts to me...great service!

First My Frig side of the double door unit wasn't closing on its own. Kids don't look, so they walk away...next thing you know the frig warms up and the freezer starts to frost up from running so long...Now it won't shut off.... I checked the hinge and sure enough it was wore down. Now mind you, I ordered a hinge kit first without checking to see what type I needed...don't do that...Less than 15 mins you can take the door off and see which one you need.As soon as I saw which type of hinge set I needed I went and ordered it...returned the other one. It came pretty quick.... 15 mins had that sucker changed and working... But... the door still wouldn't close on its own... Common sense told me the heat from the frosted freezer caused the door and frig walls to swell... Yes I said the heat... When the component in the freezer frosts up it does not keep the frig cool, nor will the freezer stay kool... the frost prevents the cool air from moving around...thus "HEAT".... It took a full 24 hrs for my frig n freezer to get back to normal... and now the door closes just fine... MIND YOU! I had to take the covers off the freezer unit inside, then take a steamer and melt all that frost off of every inch including down the drain... That took me a good 5-6 hours... and what a mess.... but it was worth my time.... because I don't have to replace my second hand Jenn-Air which I could never afford to buy brand new.... Whew....what we have to do to keep things going... $11 bucks worth of parts.... "Super Mom" :o)

Super simplet to fix. Popped out broken light switch and unplugged it and replaced with new switch. Received the part one day after ordering it from your company--AWESOME SERVICE AND TURNAROUND TIME!!! Saved at least $100 plus in repair costs/trip charge for something we were able to do. Great experience and would order from your company again. Thank you!

removed the broken bin, which was extrememely easy and set in the new one, equally as easy. The telephone staff were extremely helpful, and courteous, especially John, who took a great amount of time helping me find the correct part. Thank all of you.

Just placed the item in the proper holding slots. I was very pleased with the service from the company and the item came quickly, so that I could start using extra freezer space.

Remove plastic hinge cover (phillips screwdriver). With door closed, remove ground wire (phillips screwdriver). Remove broken hinge (nut driver). Route wires through split in hinge body. Route wire through new hinge body. Install new hinge (nut driver). Install ground wire. Install plastic cover. Entire job took less than five minutes.

Popped out the old one......plugged in the new one and popped it back into place. My wife was happy in have light again in the fridge!

Put the new one in its place easy