All Installation Instructions for Amana Refrigerator XRSS267BW

Customer:: Tommi from Burton, MI
Parts Used:: WP67001503
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Cracked Drawer

pulled the old one out and slid the new one in. Even I did this right. If I can do it anyone can do it. The only thing I worried about was if I ordered the wrong Crisper Pan.

Was this instruction helpful to you?

Customer:: Carl from Rockaway, NJ
Parts Used:: R0181181
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers, Socket set

Bottom nylon washer gone

I watched the online video and followed the directions. The only thing that was not obvious (and this is where the video saved several minutes)was how to remove the upper part from the door. This repair makes the door seals much more effective and should reduce the compressor run time. I have to compliment you on your prices and speed in getting the parts to me...great service!

Was this instruction helpful to you?

Customer:: Sabiha from Phoenix, AZ
Parts Used:: R0181181
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Nutdriver

Door won't close and freezer frosted up

First My Frig side of the double door unit wasn't closing on its own. Kids don't look, so they walk away...next thing you know the frig warms up and the freezer starts to frost up from running so long...Now it won't shut off.... I checked the hinge and sure enough it was wore down. Now mind you, I ordered a hinge kit first without checking to see what type I needed...don't do that...Less than 15 mins you can take the door off and see which one you need.As soon as I saw which type of hinge set I needed I went and ordered it...returned the other one. It came pretty quick.... 15 mins had that sucker changed and working... But... the door still wouldn't close on its own... Common sense told me the heat from the frosted freezer caused the door and frig walls to swell... Yes I said the heat... When the component in the freezer frosts up it does not keep the frig cool, nor will the freezer stay kool... the frost prevents the cool air from moving around...thus "HEAT".... It took a full 24 hrs for my frig n freezer to get back to normal... and now the door closes just fine... MIND YOU! I had to take the covers off the freezer unit inside, then take a steamer and melt all that frost off of every inch including down the drain... That took me a good 5-6 hours... and what a mess.... but it was worth my time.... because I don't have to replace my second hand Jenn-Air which I could never afford to buy brand new.... Whew....what we have to do to keep things going... $11 bucks worth of parts.... "Super Mom" :o)

Was this instruction helpful to you?

Customer:: Ethel from Aptos, CA
Parts Used:: 10423131
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Cantilevered utility bin was broken

removed the broken bin, which was extrememely easy and set in the new one, equally as easy. The telephone staff were extremely helpful, and courteous, especially John, who took a great amount of time helping me find the correct part. Thank all of you.

Was this instruction helpful to you?

Customer:: Mary from Hartsburg, MO
Parts Used:: WP12740302
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

ice agitator was stuck and wouldn't dispense ice

I've been messing around with the old part for literally years. Every now and then the metal agitator rod would spin out of the plastic cup that joins it to the freezer. I'd have to disassemble it and try to get it back into alignment. This time nothing worked, so I ordered a new assembly. It arrived even more promptly than PartSelect predicted and it installed in five minutes. I couldn't be happier!

Was this instruction helpful to you?

Customer:: DeForrest from Copperas Cove, TX
Parts Used:: R0181181
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Nutdriver, Screw drivers

Plastic door closure was broken

The DIY video was very handy and precise to every visual detail needed for anyone to do their very own repair. It doesn't get any better than that.

Was this instruction helpful to you?

Customer:: Robert from Costa Mesa, CA
Parts Used:: 12626911ED
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Nutdriver, Screw drivers

Left Upper door hing broken

Remove plastic hinge cover (phillips screwdriver). With door closed, remove ground wire (phillips screwdriver). Remove broken hinge (nut driver). Route wires through split in hinge body. Route wire through new hinge body. Install new hinge (nut driver). Install ground wire. Install plastic cover. Entire job took less than five minutes.

Was this instruction helpful to you?

Customer:: Richard from Middletown, DE
Parts Used:: 12604201
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins

Part Broke Alpart

Put the new one in its place easy

Was this instruction helpful to you?

Customer:: Jay from Apopka, FL
Parts Used:: WP12568001
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Old Filter Kept Falling Down.

Simply replaced cover by hand. No tools required.

Was this instruction helpful to you?

Customer:: Betty from Vallejo, CA
Parts Used:: W10133828
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Worn/torn fresh food gasket

This was an easy fix. Just pull off the old gasket and press the new gasket in place.

Was this instruction helpful to you?

Customer:: George P from McKinney, TX
Parts Used:: WP12740302
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Nutdriver

Ice maker stopped dispensing ice.

Ordered the correct replacement part (Icemaker Auger and Crusher Blade Assembly) as found here at PartSelect.com. Part was delivered within two days. Removed two screws to remove the old assembly; inserted new assembly, replaced the screws and problem fixed. Couldn't be easier.

Was this instruction helpful to you?

Customer:: Sara from Walsenburg, CO
Parts Used:: WP12740302
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Nutdriver

Auger quit working - wouldn't dispense ice

Removed old auger unit by removing two screws - installed new auger unit by replacing the two screws. Easy schmeasy!

Was this instruction helpful to you?

Customer:: Dennis from Mammoth Lakes, CA
Parts Used:: WP67005959
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Rim of ice bucket broke off and was cracked

1.Lift out the ice bucket. 2.Remove two screws at bottom. 3. Remove front (made up from parts 20 and 21 in diagram by lifting the plastic flanges at the bottom and sliding it off upwards. Fingers were adequate to lift the flanges. 4. Remove the mechanism. It comes right out. 5. Slide the mechanism into the new bucket. 6. Put the front onto the new bucket by sliding down and lifting the flanges over the ridge at the bottom of the bucket. 7. Put the two screws in at the bottom. 8. Slide the bucket back into the freezer. This was the easiest repair I have ever done.

Was this instruction helpful to you?

Customer:: Anthony from Olathe, KS
Parts Used:: W10142650, WP12740302, 67006425
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Nutdriver, Socket set

Ice maker no longer vending ice

Very easy repair just follow the instructions provided here

Was this instruction helpful to you?

Customer:: Bruce J. from Findlay, OH
Parts Used:: WP67005959, WPD7749401
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

ice would not come out end cap broke

take the front off the ice maker. take the bar out. then replace the helix end cap. then put the bar back and the front.

Was this instruction helpful to you?

XRSS267BW (PXRSS267BW0) Amana Refrigerator - Instructions