GT2488PKCW Amana Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- ROBERT from WESTFIELD, IN
- Parts Used:
- WP628356
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Pliers, Screw drivers
broken hinge bearing on ice maker
Disconncted power, pulled plug on disconnect, loosened 3 ice maker attach screws, removed ice maker. carefully removed old broken part, to understand reasembly. Reinstalled new water fill & bearing part.. hung icemaker and tightened attach screws. Reattached electrical plug.. turned on power, it all worked. .took about 45 min to remove, 15 min to reinstall. Right tools needed re disassembly AND ASSEMBLY
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mary L. from Millsboro,, DE
- Parts Used:
- WP627843
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Ice maker ejector arm broke into.
Removed old ejector arm and installed new part.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Charlotte from Cambridge, MA
- Parts Used:
- WP61001886
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Ice catcher was missing from the icemaker
I removed the ice catcher from the excellent packaging, rinsed it, and placed it on the counter next to the fridge. I opened the door the the freezer and placed the ice catcher under the icemaker. I lowered the arm on the icemaker and closed the door to the freezer. Then I opened the door to fridge, took out a Guinness, popped the top, and sat down to savor my success.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Rob from Bolton, CT
- Parts Used:
- WP61002653, WP61002308, WP61002307
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Meat pan rails were cracked and broken.
This repair was quite simple. The rails basically slid off from the the drawer. I then had to screw on the rack wheel and replace the rails by guiding the notcc into the hole and slide it back. The whole process to replace both sides took only 10 minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Carolee from Spokane Valley, WA
- Parts Used:
- W11384469
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Light switch broke
Pried out old part with screwdriver. Unplugged. When new part came, just plugged it in and pushed the part into place.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Cathy from HOPATCONG, NJ
- Parts Used:
- W11384469
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Light rocker switch broke and refrigerator light couldn't go on.
I just popped out the old switch with a flat head screwdriver. Removed the connections and then installed new switch by reversing steps. Popped in back in and the light went on.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joseph from BALLSTON SPA, NY
- Parts Used:
- WP67002190
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Slide rail broke
Replaced with new rail & popped it into place
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from GROVESPRING, MO
- Parts Used:
- W11384469
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
light did not work on the refrigerator side
bulbs were not burnt out. received the new switch in a few days. watch the short video, was good to see how it comes out. used a putty knife to release the defective switch, removed wires put them on the new one and posed the new switch back in. Not bad Part cost $11.00 7 dollars shipping so for 17 bucks it works great. nice to see what is inside the refer!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David Barnes from ROSWELL, NM
- Parts Used:
- W11384469
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Rocker on switch broke off
Eased the putty knife under the edge of the switch housing and pried it off. Pulled two wires off the old terminals and hooked them onto the new one and reinstalled into the refrigerator body.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kathy from TEMECULA, CA
- Parts Used:
- W11384469
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
Light switch broke off
We looked up the problem online with the model number of the refrigerator. We ordered the part and followed the video installation that was sent with the order and was found online prior to purchasing
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lorraine from Durham, NC
- Parts Used:
- WP61002623
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Crisper Glass Broke
Nothing to it. I unpackaged the item. Cleaned it and placed in refrigerator. Great!
Dealing with your company was a breeze. From start to finish. Thank you for the transation from start to finish.
Dealing with your company was a breeze. From start to finish. Thank you for the transation from start to finish.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from Coeur d'Alene, ID
- Parts Used:
- 61002719
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
tilting shelf fell out, pin "disappeared"
Replaced the pins.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- A. Nurhan from PARAMUS, NJ
- Parts Used:
- WP61002286
- Difficulty Level:
- Difficult
- Total Repair Time:
- 15 - 30 mins
Replacing the light guards
I removed the old one and replaced with the new one. The right side one was quite easy whereas the left one took a longer time.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from Discovery Bay, CA
- Parts Used:
- WP2182124
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
The ice stripper cracked from freezing.
There was three screws to remove to unmout the ice maker, and unplug the wire harness,then two to remove to slip in new stripper. All took about 20 mins.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Edward from Admire, KS
- Parts Used:
- WP61002653
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Broke rail when a too heavy casserole was placed on a nearby shelf and it slipped off
I am not very good at fixing things. Googled for parts and your site came up. Easy to find necessary item via nice clear pix.
I ordered part at 3:45pm on a Thursday over internet. Part arrived Saturday early afternoon. I do not know how you could get it here that fast.
Was easy to replace and it was VERY inexpensive. Thanks so much
I ordered part at 3:45pm on a Thursday over internet. Part arrived Saturday early afternoon. I do not know how you could get it here that fast.
Was easy to replace and it was VERY inexpensive. Thanks so much
Was this instruction helpful to you?
Thank you for voting!