SXDE522K (P1109902W) Amana Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Craig from Oakland, CA
- Parts Used:
- WP12740302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Icemaker Auger was not despensing Ice or Crushed Ice without dislodging
Opened box removed Icemaker Auger and Crusher Blade Assembly (assembled). Removed Ice bucket from refrigerator, took off face cover, removed two screws at the bottom of auger assembly and removed the auger from the bucket and inserted the new one replaced the two screws. Installed the Ice bucket. Worked like a charm.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Douglas from Lexignton, KY
- Parts Used:
- WP12740302
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
auger was broken
Ordered the replacement. Removed the old one, followed the instructions, installation was a snap.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Beverly from Chino Valley, AZ
- Parts Used:
- WP12740302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Ice cubes would not come out
I removed 2 screws and lifted out the old part and replaced it with the new one, I am 79 years old and it only took about 25 minutes to have ice cubes again.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Corpus Christi, TX
- Parts Used:
- WP12740302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
Auger would get jammed with ice in dispenser
Replacing the auger assembly was easy. Unfortunately it did not fix the problem, which was a weak auger motor. The motor would not turn the auger when a piece of ice would go into the area where the blades push it out. It would instead stop the motor and make it screech. This happened with every third piece of ice. Replacing the motor, which I bought elsewhere (couldn't find on this site) fixed the problem.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jack from Rockaway Beach, MO
- Parts Used:
- WP67002271
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
broken part
I changed out the ice wheel inside the ice bucket. Jack
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Oskaloosa, IA
- Parts Used:
- WP12740302
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
The ice maker auger was sprung out of alignment by ice cubes jammed at the rear of the ice basket (drawer).
The problem had occurred twice before and the metal auger could no longer be reliably forced back into alignment with its end cap. It was time for a replacement. I opted to replace the entire auger assembly including the crusher blade - a total of three individual parts in this assembly. With the Amana model and serial number in hand, I logged into PartSelect and found the ice maker part(s) in the fridge schematic diagram. I ordered the assembly which arrived early. It is easy to disassemble. Remove the ice drawer from the freezer, minus the ice, and place it upside down on a work surface. You only have to remove four screws; the two on the front bottom of the ice drawer and the two screws holding the little L-shaped brackets that receive those two bottom screws. Tip: To avoid any confusion during reassembly, just take a picture of each step of your disassembly. You can do it Noonan.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Timothy from Gilbert, AZ
- Parts Used:
- R0181181
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
Broken Door Cam
I was very pleased with the entire experience. The part was easy to locate on the web site, it arrived very quickly and you sent a how-to video.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gregory from Willow Park, TX
- Parts Used:
- WP12740302
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
Ice would not dispense
Reomove Ice bin from unit.remove plastic front. Remove the 2 bottom screws of dispenser assembly. removed old assembly. position new assembly. Replace bottom 2 screws.reinstall plastic front and reinstall into unit.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sam from Dallas, TX
- Parts Used:
- D7749707
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Wrench (Adjustable)
Ice collection tray shattered around exit mechinism
The picture on the web did not look right , but the part was an exact fit.The note about the left handed nut in the other self help instructions was a life saver.Phone help was very helpful. Shipping was very quick.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from Long Beach, CA
- Parts Used:
- R0181181
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Socket set
bottom door cam worn down
remove right door replace lower door cam
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kenneth from Gladstone, MI
- Parts Used:
- WP67002052
- Difficulty Level:
- Very Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers, Wrench set
Plastic wheel was broken- we found parts in drink
There were 23 parts to be removed in order to replace part. So I printed out a diagram of the parts off the computer and the labled each part on the diagram with its name. I laid them all out in order and patiently re-assembled the ice maker. When finished, I gave a cheer!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from Southport, NC
- Parts Used:
- WP67004977
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers
Refrigerator door not closing automatically.
Replaced door closer part on hinge. Did not fix problem. Be sure to order mating bushing that goes in the bottom of the door . Part #67004977
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bubba from Greenville, MS
- Parts Used:
- WP10359709Q
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver
sealingcompletelysealarounddoorwasnot
took the door off the hinges laided flat and withcordless drill and socket took the gasket off and replaced it with new one
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mary from Las Vegas, NV
- Parts Used:
- WP12740302
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Wrench set
Expected repair instructions to come with
I had watched my handyman take the old auger out realign it so I knew pretty much what to do, that adjustment did not work so I had to order new auger. Problem was lining up the screw holes, metal to ice box, just did not want to work. After about an hour of trying realized that the nylon grooves t the bottom could be slid in from each side after the holes were matched--hard to explain. Being female seems to take us longer to think this out.
Was this instruction helpful to you?
Thank you for voting!